5V eWeLink Smart WiFi Switch Universal Relay Module 8CH DC 8-28V Wireless APP Remote Control Self-Locking Relay for Smart Home

eWelink 8-way module manual:

● Use eWelink for mobile apps (supporting Apple and Android phones): Search for "eWelink" in the mobile software market or on the app, download, install, and register it;

●Add 1-4 channels: Press and hold the "A1" button on the module until the light flashes 3 times (if powered on, it does not need to flash 3 times), and then operate the add device on the phone;

●Add 5-8 channels: When the module is powered off and restarted, press and hold the "B1" button on the module (if there is no B1, press A5) until the lights flash 3 times (if powered on, there is no need to press the interval flash 3 times), and then operate the add device on the phone

●If you can't find it on your phone all the time, please exit the app and try again. Repeat the operation several times (remember to power off and restart the module).




APP function setting instructions:

Support the mobile eWelink APP function settings as follows:

1. Jog: Maximum time 59 minutes and 59 seconds

Timing: Up to 23 hours and 59 minutes

Delay: Up to 23 hours and 59 minutes

Fully open,

Fully closed,

2. Interlock, supporting all interlocks, that is, only one relay can be activated.

3. Power-on status, supporting power-on on, power-on off, and restoring the state before power-off.

4. Support for sharing devices

5. Supports offline reminders

6. Support for querying operation records

7. Support device name change and corresponding channel name change

8. Support scenario linkage settings.




【 RF 433MHZ Remote Control Function Description 】 (supports 433mhz remote control) (If there is any flashing that does not comply with the step sequence during operation, please power off and restart to try again),




Attention: To restart after power outage, wait for the indicator light to flash completely before operating;




Action explanation: Self locking (press once to open, then press once to close)

Action explanation: Jog (press once to open, automatically close after about 0.5 seconds)

Action explanation: Press the lock (hold it down and do not release, release and close)

Action explanation: Only on (this key can only be turned on and cannot be turned off)

Action explanation: Only close (this key can only be closed and cannot be opened)




(Learn self-locking) Quickly press the "Settings" button 5 times, and relay 1 will flash. (Click the Settings button to change the relay number to be learned) At this time, long press and hold one key on the remote control to learn one key. You can continue to press all keys. After the operation is completed, you need to power off and restart;




(Learn to jog) Quickly press the "Settings" button 6 times, and relay 1 will flash. (Click the Settings button to change the relay number to be learned) At this time, long press and hold one key on the remote control to learn one key. You can continue to press all keys. After the operation is completed, you need to power off and restart;




(Learn to press the lock) Quickly press the "Settings" button 7 times, and relay 1 will flash. (Click the Settings button to change the relay number to be learned) At this time, long press and hold one key on the remote control to learn one key. You can continue to press all keys. After the operation is completed, you need to power off and restart;




(Learning only opens) Quickly press the "Set" button 8 times, and relay 1 and 2 will flash simultaneously. Press the "Set" button once to change to relay 1 flashing (continue to click the "Set" button to change the relay number to be learned). At this time, long press one key on the remote control to complete the learning;




(Learn only to close) Quickly press the "Set" button 9 times, and relays 1, 2, and 3 will flash simultaneously. Press the "Set" button once to change to relay 1 flashing (continue to click the "Set" button to change the relay number to be learned). At this time, long press one key on the remote control to complete the learning;




(Learn to fully open) Quickly press the "Set" button 8 times, and relays 1 and 2 will flash simultaneously. At this time, one key of the remote control will learn to fully open, complete;




(Learn to fully close) Quickly press the "Set" button 9 times, and relays 1, 2, and 3 will flash simultaneously. At this time, one key of the remote control will learn to fully open, complete;




(One button in the learning area controls relay 2.3.8 at the same time): Press the "Set" button 5 times, relay 1 flashes, press the "Set" button 1 times, relay 2 flashes, press the "Set" button 3 times, relay 2 and 3 flash simultaneously, press the "Set" button 8 times, relay 2.3.8 flashes at the same time. At this time, press and hold button 1 on the remote control until the relay light changes, release, power off, and restart, complete.




Additional function: Set relay 3 to jog for 200 milliseconds (note: if the indicator light is incorrect midway, power off and restart immediately):

(1) Quickly press the "Settings" button 11 times, observe that the indicator light next to the settings button keeps flashing 3 times, and relay 1 lights up,

(2) Press the "Set" button once, and relay 2 will light up,

(3) Press the "Set" button once, and relay 3 will light up,

(4) Quickly press the "Settings" button twice and observe the indicator light next to the settings button flashing at a constant speed,

(5) Press once to set relay 3 to remain on,

(6) Press the "Set" button three times, and relay 3 will jog for 100 milliseconds

(7) Press the "Set" button three times, and relay 3 will jog for 200 milliseconds,

(8) Press and hold the 'Settings' button for 2 seconds to save and exit, complete.

Repeat (5), (6), and (7) to reset, with a minimum jog speed of 50 milliseconds

(Reminder: You can continue the operation by pressing 3 times above. Each time you press 3 times, it increases by 100 milliseconds. If you press 2 times, it increases by 50 milliseconds. If you press 4 times, it increases by 1 second.)




● Factory reset:

Press and hold for 10 seconds, observe that the indicator flashes 8 times, and all are deleted successfully.




Support: Inching, self-locking, interlocking, timing, delay




Reminder:

Due to the continuous upgrading of the product, slight changes in the layout of the components are normal. If there are any mandatory requirements, please make notes and explain them. Please consult and communicate more before purchasing.