915 Generation Coax Cable Crimper Kit Tool for RG6 RG59 Coaxial Compression Tool Kit with 15Pcs F RG6 RG59 Connectors

The cable stripper is used with RG58596263v2v4c5c and 2 Fully adjustable and repable It is equipped with a hexagonal tool to adjust the depth of the v-shaped rotate it clockwise for 3 to 7 circles at one time and retain the inner core
Crimping tool 3-in-1 is used with RG-6 RG-59 RG-58 etc Compression distance 203mm extrusion fixture adopts high standard crimping die Press accurately and it is not easy to damage the F head
High-quality f connector is suitable for rg6 coaxial cable it provides professional and safe connection for rg6 coaxial cable Indoor anti-corrosion plating
The kit is a solution for DIY to use coaxial cable termination tools for tool installation in the industry For example install satellite TVCCTV mobile cable TV and cable modem or for new houses
After adjusting the cable depth it is easy to strip the cable the adjustable stripper can rotate and adjust head into four types of coaxial cables

F-Type Compression Crimping Tool
Size 5 5Inch
Compressed Distance 0 8Inch
Compatible RG6 5C RG59 4C
heavy duty crimping tool for fitting snap-seal and F type connectors Coaxial Cable Tool
Length 4x1x0 7Inch Compatible RG-58 RG-59 RG-62 Double s coax cable stripper
How To Use The Crimper
1Insert the plunger into the tool's holder and then Insert the stripped cable into the connector and make the cable is inserted to
2 P the connector with cable into the tool's holder
3 Squeeze handles
4 Remove the crimped connector from the tool
How To Use The Coax Cable Stripper
1 Put the cable into connect hole
2 Press down the handle
3 Rotate the tool along clockwise direction until the cable of
4 Take out the cable
ColourAs Shown
MaterialMetal

Package Contents
1 x Crimper
1 x Coax Cable Stripper
15 x F Connectors for rg6 Coaxial Cable

Only the above package content other products are not included
Note Light reflection and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm