915 Generation For Console Cooling Fan Vertical Stand Charging Holder

1. New Smart Stand: The cooling stand can lower the operating temperature of the device for console. It can effectively reduce the temperature of the console, the performance of the console and reduce power consumption.
2. Easy to Use: The fan control switch of this stand is the single-button auto-reset switch, which is controlled by a smart chip. Press this switch lightly to make the fan work at the highest speed level. Each time you press the switch, you can switch the speed level or turn off the fan (3 levels, including the high level, middle level and low level, and press the switch time, you can turn off the fan)
3. Indicator Lights: Red, orange, green and off. The indicator lights can be switched at will according to the temperature. cooling fan can the air circulation of the console system to effectively prevent the console temperature from becoming too high. Reduce the power consumption of the console and extend service life. The smart MCU chip can also cut the memory power, so the cooling stand will work at the same wind speed level again after the power outage.
4. Compatible Ports: There is a Type A USB 2.0 port and a public port on the left side of the product, which can be used for external devices.
5. Note for Use: During use, place this product on the table or at a -ventilated place. Specifications:
Applicable models: for Maximum fan speed:
Fast speed level: 3200 +/- 320 rpm
Medium speed level: 2800 +/- 280 rpm
Low speed level: 2300 +/- 230 rpm
2 built-in cooling fans
Important:
During use, place this product on the table or at a -ventilated place.
This product is a cooling stand. do not block any surface ventilation part during use.
Do not insert anything (especially l parts) into the heat dissipation hole. Otherwise, it may damage the fan or the circuit in the stand and cause damage.
Colour: white
Material: ABS
Size: 18 x 6 x 5cm Package Contents:
1 x cooling fan base Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.