915 Generation For Programming Cable Speed Limit Release Wheel Diameter Setting M400 M600 M510 All CAN Protocol Dedicated Line

This is the programming line specially used for the CAN protocol motor It can solve the problem of setting the wheel diameter and releasing the speed limit
When your M600 motor is limited by the to 32KMH do you feel that the speed is too slow to satisfy You when you change to a new because the size of the wheel diameter and the size set in the motor are different and the speed displayed on the display is wrong it always feels disappointing
This programming line can solve your troubles and make you happy stand up This programming line is simple and easy to operate

Operation introduction
1First the motor is connected and powered on
2the motor is connected to the main line of the instrument
3the interfaces at both ends of the programming cable are connected to the motor and the display screen
respectively
4the USB plug of the programming cable is connected to the USB interface of the computer or display
screen
5The programming line indicator lights up to indicate that the connection is successful For detailed tutorials see the video tutorials
6If there is a 25 fault code after connecting just press the module on to return to normal For some models when the wheel diameter setting is switched the wheel diameter size of the display screen does not change At this time you need to exit the setting and return to the main page of the display screen to re-enter the setting Then you can see the wheel diameter you set
Material plastic
colour As shown

Package Contents
1 x Programming Cable

Only the above package content other products are not included
Note Light reflection and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm