915 Generation For Raspberry Pi RP2040 Development Board 1.28Inch Round LCD 240X240 Pixels DualCore Arm Processor, USBC Connector

Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
264KB of SRAM, and 2MB of on-board Flash memory
USB-C connector, keeps it up to date, easier to use
On board a 1.28-inch LCD screen
All GPIO's (30 in total, but some pins have been connected to the internal bu circuit, so please pay attention when multiplexing. Please refer to the details) are led out by 1.27-pitch bus bar.

USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels
Accurate clock and timer on-chip
Temperature sensor
Accelerated floating-point libraries on-chip
8 x Programmable I/O (PIO) state machines for custom peripheral support
On-board lithium battery charging and discharging interface is beneficial for RP2040-LCD-1.28 to be used in some mobile scenes.
Colour:As Shown
Material:plastic

Package Contents:
1 x Development Board

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.