915 Generation Lm2596 DC Converter Module - DC Adjustable Converter

This is a DC-DC converter module that can convert 3.2V-35V to 1.25V-35V with a maximum current of 3a.
-down converter module is used to reduce the voltage. Therefore, make that the input voltage is at least 1.5 V higher than the output voltage.
The efficiency of -down module is very high, which is useful for the pull-down voltage.
It is recommended that the current be 2.5A for long periods of time. If it is 2A (power more than 10 W), the heat dissipation will be changed.
The DC-DC module converter is widely used in the low voltage system supply, 6V, 12V, 14V, 24V battery charging and regulated power supply. Type: power module
Model: LM2596 Step-Down Module
Input voltage: 4V-35V
Output voltage: 1.23 V - 30 V.
Output current: 3A (maximum)
Conversion efficiency: 92% (maximum)
Output ripple: less than 30 mV
Switching frequency: 150kHz
Working temperature: -45 Celsius + 85
Power supply (3-40 V), the power indicator lights up and the module works normally.
Adjust the blue potentiometer knob (usually clockwise to , counterclockwise to rotate down) and use a general expression to monitor the voltage required for the output voltage.
Caution: As this is a step-down module, it is recommended to work for a long time with a current of less than 2.5 A and to a heat sink (output power 10 W). Maintain the minimum difference of 1.5V to stable performance.
Colour blue
Material: printed circuit board
Size: 4.3 x 2.1 x 1.4 cm Package contents:
1 * converter Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.