915 Generation M8x60mm Wall Concrete Brick Expansion Screws Closed Hook Anchor

M6 male thread Expansion screw hook anchor bolt with flat washer and hex nut
Closed hook suitable for and fixing of items and fixtures to concrete brick walls and any solid surface
Installation methods Select a chopping bit with the same diameter as expansion screw casing and install it on the electric drill for punching
The depth of the hole should be to the length of the bolt
Then insert the expansion bolt set into the hole

Do not screw off the nut and prevent the bolt from falling into the hole when the drill is too deep
Tighten the nut for 2 to 3 buckles and unscrew the nut when expansion bolt si tight without any looseness
Then the fixed items are mounted with perforated fixed part and installed at bolt
The gasket or spring washer outside is used to screw the nut tightly
Product Name Expansion Hook Bolt
Main Color Silver Tone
Expansion screw length 60mm
Expansion tube length 40mm
Ring nut length 34mm
Outside diameter 34mm
Material 304 Stainless Steel
Weight 136g

Package Contents
2 x Expansion Hook Bolt

Only the above package content other products are not included
Note Light and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm