The -Z19C carbon dioxide sensor (hereinafter referred to as the sensor) is a general-purpose intelligent small sensor that uses the principle of non-dispersive infrared (NDIR) to detect the presence of C02 in the air.
Built-in temperature compensation: simultaneously has serial output, PWM output, easy to use. The sensor is a high-performance sensor made by closely combining mature infrared absorption detection technology with sophisticated optical circuit design and sophisticated circuit design. Detection : carbon dioxide
Power supply voltage: DC (5.0 +/- 0.1) V
Average current: less than 40mA (@5V power supply) current: 125 to (@5V power supply)
Interface level: 3. 3v (compatible with 5v)
Measuring range: 400-5000PPM
Warm-up time: 1min
Response time: T90less than 120s
Working temperature: -10-50degree
Working humidity: 0-95%RH (no condensation)
Pin description:
Vin: Power +(in)
GND: power supply-(GND)
PWM: PWM
Hd: HD (zero calibration, low level is effective for more than 7 seconds)
: UART (RXD) TTL level data input
Tx: UART (TXD) TTL level data output
Type: Sensor
Model Number: -Z19C
colour:Golden
Material:plastic
size:33 x 20mm Package Contents:
1 x -Z19C IR Infrared CO2 Sensor Module With cable Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.