E Adapter 2 Ports 3.0 To E X1 Expansion Adapter Card 3.0 E -e Converter L 88SE9125

Specification: Meets Serial ATA 3.0 specification, backward compatible with 2.0 1.0 Compliant with -Expre v2.0 specification, backward compatible with -Expre v1.0. Supports communication speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. Supports Four Support AHCI1.0 mode and IDE mode Support native command queue (NCQ) Supports FIS based on port multlier switches or command switches. Hot-swappable and hot-swappable. Compatible with 6G, 3G and 1.5G Hard Drives Bus interface: -Expre x1 slot(Compatible -E X2 X4 X8 X16 ) Extension ports: 2 Port 3.0 interfaces Feature: with large heat sink for long time safe working Main Chs: l 88SE9125 or ASM1061

System Requirements: Windows 10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux

System disk and E to 3.0 adapter card connection conditions and solutions: 1. E to 3.0 interface mode is AHCI mode, if you want to insert the system disk in our card, the premise is that your system disk installed on the must be AHCI mode installation, otherwise it can not pa Our card adapter card boot system. 2. If it is determined that the system disk is inserted in the AHCI mode of the interface mounting system on the mainboard, then the hard disk can be directly inserted into our card, and then the mainboard BIOS is set to start the system disk as the first boot. 3. the above two conditions are available, if you still can not start, or repeatedly restart, then the hard drive interface and our adapter card conflict, the solution is to enter the BIOS, the 's hard disk interface options set to Disabled, save and restart to boot the system Attention: Don't Support as System

Kind Ts: 1. With 3.0 data cable to achieve the best results. 2. -E X1 or X16 must be it is V2.0 version, -E V1.0 speed will not exceed 250M, we suggest directly inserted On the X16 slot, the -e x16 usually is v2.0 3. BOIS setting of the : mode should be changed to AHCI, although some E is version 2.0, but BOIS does not enable high-speed transmiion mode by default (gen2 high speed mode) needs to be manually turned on. Thanks! 4.Warm ts: because Lenovo and Dell computers shield the BIOS interface of the third-party array card, it will lead to unpredictable compatibility probl. Please Lenovo and Dell computer's user do not buy . Thank you.

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.