0-180ml/min KPHM100 Peristaltic 24V Ster/DC Motor Zero-pollution Cost-effective S-priming for Lab Dosing

KamoerKPHM100Micro Peristaltic 24V 12V Zero-pollution r Stability

Three Kinds of Motor Selection

Left-Ster motor; Middle-Brushle motor; Right-Brush motor.

★Suitable for the nsfer of viscous and non-viscous liquids

★Ul small size, compact structure, light weight

★A variety of tube materials are available

★Plastic gear nsmiion, high reliability and low noise

Basic s

KPHM100 Peristaltic Brush motor

Flow ml/min

100-140ml/min

Noise

≤60dB

Power

6W

Control method

Switch control

Voltage

12V/24V

Motor lifetime

800H

Weight

≈105g

lifetime

1000H

Optional

BPT B10(10#) ID3mmx OD5mm

HA24V/0.25A

HB12V/0.5A

120ml/min

Optional acceories

L plate 56.6×31.2×13mm

Sight connectors:1/8 support outer :ID3mmx OD5mm

Supplementary instructions

The above s are measured with pure water without preure under the standard atmospheric preure at room temperature of 20°C. Actually, there will be certain errors in the flow rate according to different media, different outlet preures, and DC motor speed errors. The data are only for reference. Also can be customized according to customer needs

Basic s

KPHM100 Peristaltic Ster motor

Flow ml/min

9-140ml/min

Noise

≤60dB

Power

10W

Control method

Ster motor driver board

Voltage

24V

Motor lifetime

6000H

Weight

≈235g

lifetime

1000H

Optional

BPT B10(10#) ID3mmx OD5mm

300RPM

110ml/min

Optional acceories

L plate: 56.6×31.2×13mm

Sight connectors: 1/8 support outer :ID3mmx OD5mm

Driver board: MODBUS-ITU(It can realize built-in and external potentiometer speed regulation, can realize MODBUS RS485 communication and 0-10V og speed regulation, realize electric and trier two start and stop modes, the maximum subdivision is 32, and the drive current can be set (0.7A, 1.2A) , 1.7A, 2.2A, 2.7A, 2.9A, 3.2A, 4.0A)

KMD-42B-P+2802: Support clockwise and counterclockwise operation, LED 4-di dial tube display, various control methods: rotary , foot switch, external og, 485 communication control

Supplementary instructions

The above s are measured with pure water without preure under the standard atmospheric preure at room temperature of 20°C. Actually, there will be certain errors in the flow rate according to different media, different outlet preures, and DC motor speed errors. The data are only for reference. Also can be customized according to customer needs

Various Application

Left 1:     Water quality online yzer

Right 1:   yzer

Left 2:     Hypochlorous acid yzer

Right 2:   Large commercial sweeper

More Details

Bull Head Structure Design

1  BPT

2  High permeability PC plastic

3  Brushle motor

4  High permeability PC plastic

5  Rotors

6  Mounting plate

Strong Power & High Cost Performance

Installation Description-Through Plate Installation

Connection Description

Brush motor- Red sideis positive.

Brushle motor- Red lineis Positive.

- Blaline is Negative.

-Green lineis Signal Feedback.

-Yellow lineis CCW/CW.

-Blue lineis PWM.

Note:

1. Running at full speed:  Red for Positive; Blaand Blue for Negative.

2. PWM controller:  Red for Positive; Blafor Negative; Blue for PWM; Yellow for CCW/CW; Green for Singal feedba.

Ster Motor

- Red lineis B-

- Blaline is A+

-Green lineis A-

-Blue lineis B+

Dimensions-Mounting Plate Hole Size

Left for DC; Right for Ster.

DC Motor Dimension

Ster Motor Dimension

Acceories Choice

1. Driver Board

2. Connector(1/8- 2.4＜ID≤3.2) and Power Adapter

With ed BPT

FAQQ1: Can KPHM100 meet 3ml/min and the voltage should be 24VA1: Yes, sting model KPHM100 is recommendedQ2: What boards can KPHM100-brushle and ster be used for control/operation?A2: Brushle motor: three-wire diaphragm speed controller; ster motor: 4460.5 driver boardQ3: Does the KPHM100 series support customized threaded joints (like KFS)A3: NoQ4: What is the difference between KPHM100-HA HD ST?A4: DC 24V, HA brush-800H life; HD brushle-2000H life; ST ster-6000HQ5: How does the KPHM100 ster absorb liquid?A5: With 4460.5-Modbus protocol, just change the direction of the motorQ6: How to change the direction of the KPHM100 brushle model?A6: Connect to the equipment on the customer's side, and the direction can be changed by sending a signal. Connect the commutation line to the negative pole or hang it in the air to achieve commutation.Contact us if any question.We are always at your service!Waiting for your order.