0-190 Car Boat Sewage Level HTG 52mm Holding Tank Level r+ 8 Color LED 9-32V Fit Boat RV Marine

supporting Customized , if you need customized , please contact to u

r Feature:

- Protection ank: IP67- Resolution range: 21 mm- Aembly: SAE standard 5 holes- Rated current for alarm switch: 500mA- Operating temperatures: - 40 to 85 Celsius- Fit for sewage / Level and Water Level - r Length :150MM~450MM- Mounting: 5 pieces of M5 screws and 2 mm thiket- Output signal: 0~190 (Standard European),

Feature:

- Backlight Color : 8 Color Backlight- Protection rank : IP67- Input signal : 0~190- Working Voltage : 9~32V(12V/24V)- Indicating Range : LOW-FULL- Material:Plastic,Rubber,Metal- Install diameter: Φ52mm (2'')

Operation:

- 1, Pre the Mode on (le than 1 second) to change thebacklight color: Backlight changed in sequence: red (default) → green → blue → white → yellow → yellow green → orange →Purple → (automatic).Automatic: As the s was set with the automatic , the backlight will be off for 2 seconds then lighten up, And will switch the backlight color as above sequentially.- 2,Users could select the input resistance as down below operations if you have /Water/Sewage level .Hold the Mode on for 3 seconds to enter the setting mode, balight flickering for a while. The point at the "E" position, and you could select the corresponding via preing the on as down below form.

Connection:

1,Red --+9~32VDC2,Black-- Signal Input3,Orange--Blacklight(+)4,Blue--Ground(-)

Package:

1 PCS +Cable+Manual

Specification:

Operating Voltage:9~32VDC,Operating current:≤70mA(24V);Operating temperature:-30~+75℃Storage temperature:-40~+85℃.

Package:

1PCS +r+Cable+Manual