0-190 Level + 2" 52MM Dual with Warning Light fit Oil Float Level r 100-600mm Car Boat 12V24V

2022 New 52mm Universal 2 in 1 Dual

Application: Marine Boats/Truck/Bus/Motor Home/Hot Rod/

About the Reading:

The device works, with a little delay (about 20 seconds) of changes in the readings. Apparently, it is done in order not to react to the sp of water in the tank.

Feature:

- 52mm diameter Two in One show with easy - Programmable Input Resistance Signal to adapt different /water/temperature r0-190Ω, 0-180Ω, 10-180Ω, 240-33Ω, 240-30Ω- High Resolution View under sunshine- Diameter: 52mm (2inch)- Re polarity protection and anti-foing performance- Working Voltage:12V/24V- Working temperatures: - 40 to 85°C- IP66 Waterproof

GUIDE

1. Cut an Φ52mm (2-1/16") hole in the panel (II) allow a clearance of 55mm (2 3/16"). behind the panel.2. Remove fastening ring (I), insert from front. Tighten (III) using fastening ring ( I)3. Connect cables according to the diagram/label.

Setting Menu:"Unit" "R 1" "R 2"

1.Hold & Pre the on, Power On , the LED screen will show Switch ShowUnit, R1, R22.Unit , Water Level, Sewage Level: %Water temperature: ℃ or ℉3.R1---Configure Top Row Signal RangePre on to switch 000 ~006For example, LED will show 001, which means 0~180, then release the on and wait dial f to complete to save setting

4.R2---Configure Top Row Signal RangePre on to switch 000 ~006.For example, LED will show "002" , which means 10~180, then release the on and wait dial f to complete to save setting

Package:

1 PCS +Manual

Package:

1 X r+Manual

r Feature:

- Resolution range: 21 mm- Signal: 0-190(can customized)- Working volt:9-32VDC- Operating current: ≤60mA- Operating temperature: -30~+75℃- Storage temperature: -40~+85℃- Diameter: 52mm / 2inch- r Height: Approx. 350mm / 13.8 inch- r Length: 100mm-600mm(can customized)