03L129711E 03L129086 P2015 Intake Manifold Repair Bracket For Volkswagen 2.0 TDI CR Inlet  Manifold Flap V157 Actuator Motor Kit

03L129711E 03L129086 P2015 Intake Manifold Repair Bracket For Volkswagen 2.0 TDI CR Inlet  Manifold Flap V157 Actuator Motor Kit

Application:

For VAG 2.0 TDI four-cylinder common rail engines 2008 - 2014 with aluminium manifold. Not suitable for V6 TDI or 2.0 Petrol Turbo engines.

Part number：03L129711E, 03L129086

03L129711E with V157 actuator motor only.

Fitment will vary by region. Please checkmanifold part numberon the vehicle.

For Volkswagen Amarok, Beetle, CC, Eos, Golf, Jetta, Paat, Scirocco, Tiguan, Touran and nsporter.

For Audi A3, A4, A4 Allroad, A5, A6, Q3, Q5 and TT.

For Seat Alhambra, Altea, Exeo, Ibiza, Leon and Toledo.

For Skoda Octavia, rb and Yeti.

Aociated part numbers:

Engine codes: CAAB, CAGA, CAGB, CAGC, CAHA, CAHB, CBAA, CBAB, CBAC, CBBB, CBDA, CBDB, CBDC, CEGA, CJAA, CMEA.

Specification:

100% quality aurance d,more responsive, le expensive, easier to install.

Fix your TDI CR Diesel P2015 fault code now and save yours money. You can install our set in 15 minutes with simple tools.

Installing a bracket now will stop trouble later. With this bracket in p you won't experience the wear in the mechanism and the trouble code that it creates.

Material & Color:

Made of high quality Aluminum.

Color: silver.

Package Included:

1x repair bracket kit. (100% Never Used Or Installed)

SYMPTOMS OF FAULT：

P2015, Implausible Signal - MIL ON, VAG 8213, P2002, P2009, P2015, P2017. Engine management light lit or limp mode. Intermittent or constant CEL (cheengine light) DTC 2968, 18447, 008213, Intake manifold flap position r fault.

THE FAULT：

P2015 error caused by over rotation of the actuator motor on the intake manifold

If your vehicle has a P2015 error it is very likely the main dealer will look to fix this iue with a complete new intake manifold which can cost £700+.

The fault however usually lies with the actuator motor on the intake manifold. There is a small plastic limiting stop on the erfly aembly within the manifold which this motor operates. This is delicate and inevitably wears and causes the actuator motor (V157) to over rotate triering the P2015 error or aociated symptoms.

Our repair bracket can be installed very easily providing a solid limit for the actuator motor- curing this fault for the life of the vehicle. There is no need to rep the complete manifold / actuator motor which would only fail again.

THE SOLUTION：

Fit our unique design bracket and cure this over rotation with a hard stop curing this fault for the life of the vehicle.

Our bracket can be fitted very simply usually in under 15 minutes with basic tools. It simply attaches to the manifold actuator motor and stops the over rotation which causes the fault. Many of our customers have purchased as a preventative measure before the motor fails.

Our part limits the motor to the same range as when it was new. Avoid the cost of a complete new manifold and actuator motor this would only fail again and neceitates the removal of the lines which can cause other iues.

Our bracket is unique in design, machined from billet aluminium ed then anodised Our bracket utilises stainle steel fasteners providing the best solution to this common fault.

We also include a repment spring for the actuator motor as this can often be lost or damage when fitting the bracket. Fit our bracket quickly and simply and cure this common fault.