1 Roll Posensitive Dry Film Board Circuit Production Poresist Sheets 30cmX1M for DIY Hole Covering Etching Plating

HW0000718

Specification:

Type: photosensitive dry film

Color: as ture shows

Size: approx. 30*100cm / 11.81'' x 39.37''

Quantity: 1 roll

photosensitive dry film for circuit production

Features:

Photographic film, also known as dry film, is used to make board, stick it on top of the , it will become a sensitive circuit board.

Suitable for plating, hole covering, and the etching proce.

Excellent ability to cover holes

High Resolution

Excellent adhesion to almost all surfaces

Image clarity after exposure

Front-panel is very clean after developed

How to use it:

Clean your board. Cut dry film a little larger than your board.

Apply Resist: This Photoresist has 3 layers, the top and bottom layers are clear protective layer, so at the first, you need remove one protective layer, the easy way is to use two small pieces of scotch tape. Then apply the middle layer on board.

Expose: Place your negative artwork over the rest protective layer.

Develop: Remember: you need NEGATIVE film developer, Remove the rest protective layer on the film. After 3 minutes take board out of developer and hold under running water to check, you can always place it back in the developer if needs more time.

Etching

The dry film is resistant to most of the etching solution, the PH value can be resistant to most alkaline etching solution between PH8.0 ~8.5.

Cover hole

1.5 mil dry film can fully cover a 0.25 inches thickne hole.

Plating

The dry film is available in most common use of the plating bath, no wrinkles, no color.

Package included:

1 roll x photosensitive dry film

Note:

Please allow 1-5cm errors due to manual measurement

Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.