1.5" High Performance Spacer Leveling Lift Kit without ShoAbsorbers Compatible with 2020~Current JT Gladiator 1155300

1.5" High Performance Spacer Leveling Lift Kit without ShoAbsorbers Perfectly Compatible with 2020-Current JT Gladiator, Similar to 1155300

【Specific Compatibility】Fits for JT Gladiator. (Max Tire Diameter: Sport/ Overland Fenders: 33”; Rubicon Fenders: 35”)

【Reliable Performance】This JT: 1. 5” Performance Spacer Leveling Kit allows you to run a larger tire with added clearance on the il, all while maintaining family-friendly versatility. Not only does the 1. 5” Performance Spacer Leveling Kit clear larger tires, but the additional height helps compensate for heavier aftermarket bumpers and winch, a larger spare tire, or weekend gear. Works with stolength shoabsorbers.

【Matters Needing Attention】1.Wheels w/ le backspacing than sto(4. 5-5” backspacing) will require at least 0. 5” Rear Bump Stop Strike Pad Extensions to avoid tire rubbing on the inner fender liner at full compreion when artiated. – NOT INCLUDED. 2.Models with plastic bumpers require removal of bumper-to-fender wind deflector/sp guards in order to fit 35” or larger tires.

【Included Components】4 performance spacers (0.5”Lift Front Spring Spacer*2, 1”Lift Front Spring Spacer*2), 2 bumpstops(1”front bump stop strike pad extension*2), 1 instruction manual and all neceary hardware.-12 Pieces in total.

【Satisfaction Guarantee】EPARYMT is cotted to providing excellent products and best service for our customers. If you are not satisfied with the product, you can simply return it. We support a 30-day full refund for return and a 12-month warranty.

Matters Needing Attention

Wheels w/ le backspacing than sto(4. 5-5” backspacing) will require at least 0. 5” Rear Bump Stop Strike Pad Extensions to avoid tire rubbing on the inner fender liner at full compreion when artiated. – NOT INCLUDED.

Models with plastic bumpers require the removal of bumper-to-fender wind deflector/sp guards in order to fit 35” or larger tires.

Steps for Installation

uninstall all the things connected ( 1)

lower axle and remove the front spring

install the spring spacers & factory spring isolator onto the jounce tube

reinstall the springs with the bumpstops pd inside

the bumpstop onto the axle (put the screw into the bumpstop and tighten the screw & the nut

with springs in p chethe isolator and spacers for correctgnment and that the spring is fully seated into the lower isolator