1000W Car Power Pure Sine Wave 12 to 220 Voltage Power Universal DC to AC Car Accessories Tools

1000W Car Power Pure Sine Wave 12 to 220 Voltage Power Universal DC to AC Car Acceories Tools

Package List:

shows

Notice:

1.This machine has no re connection function, battery positive and negative lines can not be connected back, otherwise it will damage the .

2.There are four 16-square models for the use of two red and two together, two blaand in, together. You can't use one alone. Otherwise the current is not enough to carry the high power.

3.When the is not in use, please turn off the switch, so as not to affect the life of the internal components, lo of battery power.

4.12V high voltage protection voltage is 15V, 24V high voltage protection voltage is 29V, 48V high voltage protection voltage is 57V. Do not exceed the voltage, or the will be high-voltage protection, do not work.

5.If you want to extend the lead between the battery to be thickened.

6.Battery is how many volts must use how many volts .

7. The larger the battery number, the greater the power used. The power of the battery is small.

8. Smart Fan has 2 boot modes

(1) The inslde temperature reaches 45 and the ligent fan starts.

(2) If high power is used, the ligent fan turns sight and the low power does not turn.

Attention:

1.The installation and coioning of the equipment shall be carried out by profeional electrical maintenance personnel familiar with the struct-ure and operation hazards of the device.

2.Fai to comply with this precaution may cause physical injury.

3.Do not connect this equipment to the civil power distribution box, such as home lines.

4.The should be away from water, avoid water droplets on the mac-hine or gradually above, do not use wet hand plug or unplug.

5.If the is in a cool environment, the appropriate temperature should be -20degrees Celsius ~ 50 degrees Celsius, avoiding direct sunlight and hot air vents.

6.s should be kept away from substances, or where flam-mable es are accumulated.

7.After long-term use, the will heat, so avoid close to the heat-sensitive substances.

8.Ensure smooth ventilation and good heat diipation.

9.High preure danger, please do not open this machine.

10.Use the right type of wire to avoid fuse because of exceive current.

11.e sure the connects the correct battery, otherwise it will fuse the fuse of the . Turn off the switch when the machine is not in use.

12.Please turn off the switch and clean with a dry cloth before cleaning. Do not use wet cloth or cleaning agent.

Product characteristics：

The adopts the SPWM technology of MCU micro-proceing control, pure sine wave output and pure waveform. The unique dyna -mic current loop control technology ensures the reliable operation of the . Strong load adaptability, including inductive load, capacitive load, resistive load, mixed load. Strong overload and impact resistance. With input overvoltage, under voltage， overload, overheating, output short circuit and other perfect protection functions. Sinusoidal adopts LCD liquid crystal display mode, the state is clear at a glance. Stable performance, safe and reliable, service life.

Product application：

Power tools: disk , , , , er, ing machine and , air compreor

Home entertainment electronics: television, caette s, video game consoles, audio, musical instruments, equipment

Industrial equipment: cloud server, face recognition server, ligent manufacturing , system

Household appliances: vacuum cleaners, fans, fluorescent lamps and lamps, s, sewing machines

Office equipment: computers, , monitors, fax machines, scanners ,Kitchen appliances: coffee er, blender, ice marker,

Protective function：

(1)Low preure alarm: with 1 Hz clearance 2 sound alarm.

(2)Low preure protection: with 1 Hz clearance 3 sound continuous alar

(3)Overpreure protection: with 1 Hz clearance 4 alarm.

(4)Overheat protection :80土5, overheat protection 1 Hz gap 5 alarm.

(5)Overload protection: overload protection 10S automatic turn off output5S automatic recovery, three consecutive automatic lock.

(6)Short circuit protection: Output Short Circuit Protection 1s shutdown lock.

Installation requirements：

installation with reference to local power requirements,

the installation site must be dry, clean and well ventilated.

Working temperature :-30°C to 40°C

Storage conditions :-10°C to 50°C

Relative humidity :0-95%, no condensation

Cooling: Forced ventilation

Frequently asked questions and solutions

●Outside interference

●The may be disturbed by some strong electroic waves in use, such as nearby motors, power converters, strong ic fields, etc.

●The has no reaction

1.The battery and are not connected and reconnected.

2. The pole of the battery is red and the fuse is fused. Rep fuse.

●Low output voltage

1.Overload, load current exceeds nominal current, turn off partial load and restart.

2.The input voltage is too low. Ensure that the input voltage is within the nominal voltage range.

●Low Voltage Alarm

1.The battery is dead and needs to be charged.

2.Battery voltage is too low or poor contact, recharge, chebattery terminals or clean terminals with dry cloth.

● without output

1.Battery voltage is too low, recharge or rep battery.

2.The load current is too high, turn off part of the load and restart the .

3. overtemperature protection. Let the cool down for a while and put it in a ventilated p.

4.The failed to start and restarted.

5.Terminal connection, fuse, rep fuse.

●The does not work

1.Chethe power switch, fuse and battery connection or e.

If you find any probl after receiving the goods, please contact us first to solve them for you.