10a 30a 660v Leadacid Solar Storage Battery Charger Control Module Digital Overcharge Protection Control Switch Led Indicator

Product Parameters:Product model: XY-L10A(10A),XY-L30A (30A)Control voltage: DC6~60vControl current: ≤10A/30A (as you choose)Control accuracy: 0.1VOutput type: direct outputVoltage error: ±0.1VUse range: various battery lithium batteriesAppearance size: 79*42MM6-60V any battery, lithium battery can be usedLCD display, battery voltage, charge percentage and charging time at a glanceThe function is very powerful, it can automatically charge control, can control the charging time, and can set and upload the corresponding parameters through the serial portParameter Settings：Press and hold the SET on to enter the parameter setting interface, the LCD will display SET;After entering the parameter setting interface, switch the set parameters by short pressing the SET on;After selecting the parameters, you can use the UP/DOWN on to set, support short press, long press (rapid increase or decrease);If you want to set other parameters, repeat steps b), c);After all the parameters are set, press and hold the SET on to exit and save;First, the function description:1. Automatic charging control function:By setting the upper limit voltage UP and the lower limit voltage dn; when the battery voltage ≤ the lower limit voltage dn, the relay is turned on, the charger starts to charge the battery; when the battery voltage ≥ the upper limit voltage UP, the relay is turned off, and an automatic charging is completed;2. Charging time control function:How to turn on time control?After entering the parameter setting, if the setting parameter OP is not 0, the time control function is enabled. The default parameter of the OP is: -----h, the time control function is not enabled by default;After the time control function is turned on (OP is not 0), when the battery voltage