10PCS TB6612 DR833 Dual Motor Driver 1A TB6612FNG for Better than L298N

Dual Motor Driver 1A TB6612FNG 

Descrtion:

The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be d to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per (or up to 3.2A for a short, single ).Board comes with all components installed as shown. Decoupling s are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.Features:

Power supply voltage: VM=15V max, VCC=2.7-5.5V

Output current: Iout=1.2A(average) / 3.2A (peak)

Standby control to save power

CW/CCW/short brake/stop motor control mode

Built-in thermal shutdown circuit and low voltage detecting circuit

All pins of the TB6612FNG broken out to 0.1" spaced pin

Filtering s on both supply line

Dimensions: 0.8x0.8"

Package Included:1 X Dual Motor Driver 1A TB6612FNG