110-240V 16A 15 Minutes Mechanical Timer 24 Hours Programmable Din Timer Time Switch Relay Measurement Analysis Instruments

Installation:

The switch is protected internally against interference by a ty device, however, partically strong electromagnetic fields may alter its operation.

Such interference can be avoided by adhering to the following recommendations during the installations:

-The device should not be installed near inductive loads(motors, transformers, contactors,etc...).

-A separate power line is recommended(equipped with a network filter if necessary).

-Inductive loads should be equipped with interference suppressors(varistor, RC filter).

If the time switch is to be used in combination with devises; it is necessary to verify that no parastic disturbances will be caused by the group.

Application:

SUL180a can be widely usedneon lights, water heaters, street lamps, staircase lights, aquaculture, garden watering, motors, advertising boxes, office automation and civilian or industrial electricity needs time control of the occasion, according to the required time for automatic control.

Specifications:

Auxiliary Power Supply: 110-240V AC, 45/60Hz

Switching Contact: 16(4) A 240V AC

Burden: 0.5W

Precision: ±3sec./24h at 22°

Working Temperature: -10° to +50°

Storage Temperature: -25°to +70°

Drive Mode: Quartz Motor

Back-up Time: 100h

Type of Dial: Daily 96 Pins

Minimum Setting Interval: Daily 15 Minutes

Manual Operating Switch: 2 Positions: ON-Automatic

Dimensions: 1 Din

Protection Degree: IP20 as per EN60529

Max Length: 90.4mm/3.56"

Width: 17.7mm/0.7"

Height: 59.2mm/2.33"

Package Contents:

1 x Time Switch

1 x User Manual