110000RPM Jet Fan 32mm Brushless Motor Turbo Fan Stepless Speed Type-C Protocol Silent High Power Dust Blower Air Duster Tools

Type A

This jet fan is simple in design, reasonable in structure, and powerful in performance, the peakwind speed is over 45m/s. Adopting 28.8mm diameter low voltage brushle high-speed motor, 8.4V working voltage, silent and strong wind. Built-in 13 large-sized fan s, which are machined by high-precise for high bility and efficiency. Unrivaled powerful airflow at 110,000rpm, one-on enhanced mode, pre and hold to starts, release on to stops. Adopts Type-C interface, supports PD fast charging protocol, energy saving design, and cost saving.Features:Pocket fan design, compact in size, easy to carry, with better utility and wider application scenarios.This fan is simple in design, reasonable in structure, and powerful in performance, the peakwind speed is over 45m/s.Adopting 28.8mm diameter low voltage brushle high-speed motor, 8.4V working voltage, silent and strong wind.Built-in 13 large-sized fan s, which are machined by high-precise for high bility and efficiency.Unrivaled powerful airflow at 110,000rpm, one-on enhanced mode, pre and hold to starts, release on to stops.Built-in 2pcs 18650 power batteries (the capacity of a single battery is 2500mAh), ennce, the highest grade can last up to about 15 minutes.Adopts 30A electronic speed control, low heat generation, 150W maximum power, and strong performance.Adopts Type-C interface, supports PD fast recharging protocol, energy saving design, and cost saving.Note:Fan of high power, the temperature will rise after full speed time running, please pay attention to rest or downspeed. Medium speed is recommended for long-term operation.When charging and discharging, please put it in a ventilated p, with no combustible materials around, if the wind speed is significantly reduced, please recharge it in time.Its housing is 3D printed DIY handmade, there are slight defects on the surface as a normal phenomenon.Specifications:Name: Jet FanMaterial: plasticsBattery: 2 * 18650 battery(included)Motor: 28.8mm brushle motorRotation speed: 110000rpmPackage size: 150 * 100 * 30mm / 5.91 * 3.94 * 1.18inPackage weight: 290g / 10.23ouncePacking List:1 * Jet Fan1 * Wind Nozzle

Type B

This jet fan is simple in design, reasonable in structure, and powerful in performance, the peakwind speed is over 45m/s. Built-in 13 large-sized fan s, which are machined by high-precise for high bility and efficiency. Adopting 28.8mm diameter low voltage brushle high-speed motor, 8.4V working voltage, silent and strong wind. The motor rotates faster, with 110,000 RPM of unrivaled strong airflow and the peakwind speed is over 45m/s. Adopts Type-C interface, supports PD fast charging protocol, energy saving design, and cost saving.Features:Pocket fan design, compact in size, easy to carry, with better utility and wider application scenarios. This fan is simple in design, reasonable in structure, and powerful in performance.Built-in 13 large-sized fan s, which are machined by high-precise for high bility and efficiency.Adopting 28.8mm diameter low voltage brushle high-speed motor, 8.4V working voltage, silent and strong wind.The motor rotates faster, with 110,000 RPM of unrivaled strong airflow and the peakwind speed is over 45m/s.Built-in 30A current regulator, with low heat generation, and strong performance, the maximum power is up to 150W.Support infinite speed regulation function, pre and hold the on to adjust the wind speed, release the on to stop.Adopts Type-C interface, supports PD fast recharging protocol, energy saving design, and cost saving.Built-in 2pcs 18650 power batteries (the capacity of a single battery is 2500 mAh), ennce, the highest grade can last up to about 15 minutes.Versatile utility fan with wider use scenarios, suitable for blowing, industrial dust blowing, soot blowing, keyboard cleaning, automobile and motorcycle cleaning, and so on.Note:Fan of high power, the temperature will rise after full speed time running, please pay attention to rest or downspeed. Medium speed is recommended for long-term operation.When charging and discharging, please put it in a ventilated p, with no combustible materials around, if the wind speed is significantly reduced, please recharge it in time.Its housing is 3D printed DIY handmade, there are slight defects on the surface as a normal phenomenon.Specifications:Name: Jet FanMaterial: plasticsBattery: 2 * built-in 18650 battery, 2500mAh(included)Motor: 28.8mm brushle motorRotation speed: 110000rpmPackage size: 150 * 100 * 50mm / 5.91 * 3.94 * 1.97inPackage weight: 310g / 10.93ouncePacking List:1 * Jet Fan1 * Wind Nozzle

Type C

This jet fan is simple in design, reasonable in structure, and powerful in performance. Powered by a brushle direct current high-speed motor with strong power, the maximum output speed is up to 130,000 RPM, which produces a strong wind speed of up to 52 meters per second, no out for loads. 3 gears of speeds adjustable, and you can adjust it according to the use demand. Suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, car center console cleaning, car crevice cleaning, foot mat crumb cleaning, picnic garbage cleaning, etc.Features:【Compact Structure】:Cordle fan is small and exquisite, compact and lightweight, and can be easily carried, with better utility and wider application scenarios and customized for tight spaces.【Premium Material】:This fan is simple in design, reasonable in structure, and powerful in performance. Made of ABS and silicone, fire and heat resistant, wear and corrosion resistant, with a service lifespan.【Brushle Motor & 130,000RPM High Speed】:The fan is powered by a brushle direct current high-speed motor with strong power, the maximum output speed is up to 130,000 RPM, which produces a strong wind speed of up to 52 meters per second, no out for loads.【3-speed Control & Infinitely Variable Speed】:3 gears of speeds adjustable, and you can adjust it according to the use demand. Eeasy and convenient to operate, greatly improving your cleaning efficiency.【Multi-functional Design】:It is a versatile cleaning tool for home, car, and office, suitable for cleaning car/home/office/seam corners, as well as quickly inflating various aircushions.【Built-in Lithium Battery】: Built-in 2pcs 21700 high-capacity lithium batteries(the capacity of a single battery is 3000mAh),, the theoretical tion (first gear) up to 4 hours, longer ennce.【Wide Applications】:Suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, car center console cleaning, car crevice cleaning, foot mat crumb cleaning, picnic garbage cleaning, etc.Specifications:Name: Jet FanMaterial: plastics+metalBattery: 2 * 33C 3000mAh 21700 battery(included)Charging interface: USBCharging time: 2.5hVoltage: 6-8.4VWind speed: 52 meters per second, 130,000 revolutions per minute, the wind can reach 16 levels 56m/sMotor: high-speed brushle motorGear: three gears adjustableUses: dust blowing, combustion, inflatableItem size: 143 * 93 * 39mm / 5.63 * 3.66 * 1.54inItem weight: 306.5g / 10.81ouncePackage size: 180 * 130 * 50mm / 7.09 * 5.12 * 1.97inPackage weight: 487g / 17.18ouncePacking List:1 * Jet Fan1 * USB Cable1 * Guideline

Type D

This jet fan is simple in design, reasonable in structure, and powerful in performance. Adopting a brushle motor, the 11-12W rpm high rotation speed design can provide strong wind with low noise. Support infinite speed regulation, wind power can be as big or as small as you like. Utilizing ul-high-speed bearings, capable of generating preures and speeds in exce of 45 m/s. Built-in 13 stainle steel s, which are machined by high-precise for high bility and efficiency. Adopts Type-C interface, supports 15W PD fast recharging protocol. Wide applications, suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, etc.Features:Pocket fan design, compact in size, easy to carry, with better utility and wider application scenarios. This fan is simple in design, reasonable in structure, and powerful in performance.The housing is made of PETG mixed carbon fiber, solid and delicate. Utilizing ul-high-speed bearings, capable of generating preures and speeds in exce of 45 m/s.Adopting a brushle motor, the 11-12W rpm high rotation speed design can provide strong wind with low noise. Support infinite speed regulation, wind power can be as big or as small as you like.Built-in 13 stainle steel s, which are machined by high-precise for high bility and efficiency.One on on/off, easy to use. Built-in 2pcs 21700 power batteries (the capacity of a single battery is 3000 mAh), ennce.Built-in 30A current regulator, with low heat generation, and strong performance.Adopts Type-C interface, supports 15W PD fast recharging protocol, energy saving design, and cost saving.Equipped with blue indicator light, LED light beads, power on automatically lightup, very beautiful.Wide applications, suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, etc.Note:Please don't use it for a time, prolonged use will cause the body to heat up. Please p it in a ventilated and cool p when charging.Specifications:Name: Jet FanMaterial: plasticsBattery: 2 * 21700 battery(included)Motor: brushle motorRotation speed: 110000rpmPackage size: 150 * 100 * 55mm / 5.91 * 3.94 * 2.17inPackage weight: 322g / 11.36ouncePacking List:1 * Jet Fan1 * Wind Nozzle

Type E

This jet fan is simple in design, reasonable in structure, and powerful in performance. Powered by a high-end 70mm brushle motor with strong power, with a perfect dust removal effect. When powered by a 25.2V 6S battery (battery is not included in the shipping list, you need to buy it by yours), the peakpower is up to 2000W, and the thrust is up to 3300g. Suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, car center console cleaning, car crevice cleaning, foot mat crumb cleaning, picnic garbage cleaning, etc.Features:【Compact Structure】:Cordle fan is small and exquisite, compact and lightweight, and can be easily carried. This fan is simple in design, reasonable in structure, and powerful in performance, with better utility and wider application scenarios, and customized for tight spaces.【High Power Motor】:This ducted fan adopts a high-end 70mm brushle motor and can provide strong blowing power, with a perfect dust removal effect. When powered by a 25.2V 6S battery (battery is not included in the shipping list, you need to buy it by yours), the peakpower is up to 2000W, and the thrust is up to 3300g.【Speed Control Function】:Adopting a linear speed control on, the harder you pre, the higher the power is, and you can adjust it according to the use requirement. Easy and convenient operation, greatly improves your cleaning efficiency.【Multi-functional Design】:Uses an 80A high-power current regulator, with peaking overcurrent up to 100A. Includes power display function, undervoltage and ESC overheating protecting functions.【XT60 Battery Interface】:Adopt external battery design, reserved XT60 battery interface, powersupply voltage support 3S-6S, can be extended with any large capacity battery, or multe batteries to extend the life. (Shipping list does not include batteries, users need to provide their own).【Wide Applications】:It is a versatile cleaning tool for home, car, and office, suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, car center console cleaning, car crevice cleaning, foot mat crumb cleaning, picnic garbage cleaning, etc.Caution:Please use the fan reasonably to prevents foreign objects from entering the tail, or resulting in fai or unknown risks.Please connect the powersupply within the applicable voltage ranges, wrong voltage may cause malfunction.Please pay attention to the heat of the main unit when running continuously at full speed for more than 3 minutes, and reduce the speed or stop the machine for a rest if neceary.The battery indicator is activated when the 6S battery is connected and can display the battery level normally. 3S-4S batteries indicate a low battery level in red, so there is no need to refer to this display result.When connecting 3S-4S-6S batteries, when the battery is low, the driver will reduce the fan speed and the motor will beep, please recharge the battery to avoids over-discharging.When the fan is not in use, please disconnect the battery and the host.Recharge the battery as soon as you use it, avoids storing it fully-charged, and release half of the battery power for long-term storage.Recharge and discharge the battery in strict acconce with the battery requirements.About Battery:This product uses an external battery, do not worry about the battery compartment can not be loaded, so do not need to consider the battery capacity size iues, this product has XT60 interface, can be connected to the 6s battery by yours. Capacity of your choice, the larger the capacity the longer the range. 2200mAh reference running time of ten minutes. Shipping does not include battery.Specifications:Name: Jet FanMaterial: plasticsItem weight: 535g / 1.18lbPackage size: 100 * 70 * 70mm / 3.94 * 2.76 * 2.76inPackage weight: 910g / 2.01lbPacking List:1 * Jet Fan1 * XT60 to XT60 Power Extension Cable

This jet fan is simple in design, reasonable in structure, and powerful in performance, the peakwind speed is over 45m/s. Adopting 32mm diameter low voltage brushle high-speed motor, 12.6V working voltage, silent and strong wind. Built-in 13 large-sized fan s, which are machined by high-precise for high bility and efficiency. Unrivaled powerful airflow at 110,000rpm. Adopts Type-C interface, supports PD fast recharging protocol, energy saving design, and cost saving.Features:Pocket fan design, compact in size, easy to carry, with better utility and wider application scenarios. This fan is simple in design, reasonable in structure, and powerful in performance.Featuring a 32mm diameter customized low-voltage brushle high-speed motor with built-in 4-pole sintered s, the motor rotates faster. With 110,000 RPM of unrivaled strong airflow and the peakwind speed is over 45m/s.Brushle motor with 12.6V voltage, low noise and low heat generating, high efficiency and stable working performance, with service time.Built-in 13 large-size s, which is made by precise machining, highest efficiency and longest bility.Built-in 3pcs 18650 power batteries (the capacity of a single battery is 2500mAh), ennce, it can lat up to about 15 minutes at the highest gear.Built-in 30A current regulator, with low heat generation, and strong performance, the maximum power is up to 150W.Adopt Type-C interface, support Quick-Charging 3.0 protocol, energy-saving design, and cost saving.Support infinite speed regulation function, pre and hold the on to adjust the wind speed, release the on to stop.Versatile utility fan with wider use scenarios, suitable for blowing, industrial dust blowing, soot blowing, keyboard cleaning, automobile and motorcycle cleaning, and so on.Note:Fan of high power, the temperature will rise after full speed time running, please pay attention to rest or downspeed. Medium speed is recommended for long-term operation.When charging and discharging, please put it in a ventilated p, with no combustible materials around, if the wind speed is significantly reduced, please recharge it in time.Its housing is 3D printed DIY handmade, there are slight defects on the surface as a normal phenomenon.Specifications:Name: Jet FanMaterial: plasticsBattery: 3 * 2500mAh 18650 battery(included)Package size: 150 * 100 * 30mm / 5.91 * 3.94 * 1.18inPackage weight: 403g / 0.89lbPacking List:1 * Jet Fan1 * Wind Nozzle

Shipping:

1.We guarantee to ship goods out within 24-72 hour after payment confirmation except holiday.2.We ship by China post,HKpost ,,,according to your choice when placing orders .3.If you didn't receive the item after 45 days,please feel free to contact us.We will e all our effort to resolve the problem.4.We are not responsible for delays causedby the customs, duties,taxes or other customscharges.

Warranty:

1.All it have 1 year guarantee.IF your purchase do not meet merchantable quality, fitne for purpose or match the description, We can e sure your iues are resolved .2.For wrongly-shipped it, Please contact us in 48 hours after delivery.We will arrange to deliver the correct it or return all your payment.3.For defective or faulty products,please take photos or videos,we would resend or after confirmation.