110V 220V DIY Using Heat Gun Electric Power Tool Hot Air 300W Temperature Gun With Seat Shrink Plastic EU Plug US Plug

110V 220V DIY Using Heat Gun Electric Power Tool Hot Air 300W Temperature Gun With Seat Shrink Plastic EU Plug US Plug220V/110V EU/US plug HOT AIR GUNModel No: LS-300Rated Voltage: 110V/220vRated Frequency: 50-60HZRated Power input: 220VPLUG:EU/USHow to use the heat tool1.Plug in the heat tool2.Hold the product as shown on the pict .... Do not touch the hot nozzle3. Keep 5-6cm distance between the heat tool and item4.Do not use more than 2-3minutes continuosly to prevent overheatedNote:1. The hot air gun child with caution Please minor children in the safe use of hot air gun under the guidance of an adult to accompany!2. Heat Gun Boot time not too long, to avoid out the machine!3. Pls note that EU plug means it's 220V voltage at the same time, and the US plug means it's 110V at the same time.

Attention:

1. Do not blow the hot air gun directly at 90° to the object.

2. The recommended distance between the air outlet of the heat gun and the heating item is 5-6 cm.

3. The single use time of the heat gun should not be too long, usually 2-3 minutes. If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it.

4. The temperature of the hot air gun can only reach about 200°C, which can not be used in industrial aspects such as disaembly and welding of small iron sheet components and patch integrated circuits.