12 WiFi Relay Module for APP Remote Control S-lock DC 8V-28V AC 85V-250V Wireless Switch for Smart Home

eWelink 12-way wifi remote intelligent relay adapter switch 433 remote control inching s-locking

The module supports 4 control methods:

1. ewelink remote network control, as long as the device is online, wirele distance

2. Establish a scene mode in the APP and automatically control it.

3. Close range RF433 remote control, depending on the power of the nsmitter, normal 0-50M

4. External physical switch control, manual control

Module size: 99*87*20mm

boards are divided into: according to power supply:

1: DC-8-28V+Type-C 5V power supply

2: AC85-250V+Type-C 5V power supply

The layout of different power supply models is slightly different.

eWelink 12-way module manual:

● Use eWelink for mobile apps (supporting Apple and Android phones): Search for "eWelink" in the mobile market or on the app, download, install, and register it;

●Add 1-4 s: Pre and hold the "A1" on on the module until the light fes 3 times (if powered on, it does not need to f 3 times), and then operate the add device on the phone;

●Add 5-8 s: When the module is powered off and restarted, pre and hold the "B1" on on the module (if there is no B1, pre A5) until the lights f 3 times (if powered on, there is no need to pre the interval f 3 times), and then operate the add device on the phone.●Add 9-12 s: When the module is powered off and restarted, pre and hold the "A9" on on the module until the light fes 3 times (if powered on, it does not need to f 3 times), and then operate the add device on the phone.

●If you can't find it on your phone all the time, please exit the app and try again. Repeat the operation several times (remember to power off and restart the module).Note: Due to the characteristics of the eWelink Network module, the APP needs to add three eWelink Network modules, each module controlling 4 relays to achieve control of 12 relays.

APP function setting instructions:

Support the mobile eWelink APP function settings as follows:

1. Jog: Maximum time 59 minutes and 59 seconds

Timing: Up to 23 hours and 59 minutes

Delay: Up to 23 hours and 59 minutes

Fully open,

Fully closed,

2. Interlock, supporting all interlocks, that is, only one relay can be activated.

3. Power-on status, supporting power-on on, power-on off, and restoring the state before power-off.

4. Support for sharing devices

5. Supports offline reminders

6. Support for querying operation records

7. Support device name change and corresponding name change

8. Support scenario linkage settings.

【 RF 433MHZ Remote Control Function Description 】 (supports 433mhz remote control) (If there is any fing that does not comply with the step sequence during operation, please power off and restart to try again),

Attention: To restart after power outage, wait for the indicator light to f completely before operating;

Action explanation: S locking (pre once to open, then pre once to close)

Action explanation: Jog (pre once to open, automatically close after about 0.5 seconds)

Action explanation: Pre the lock (hold it down and do not release, release and close)

Action explanation: Only on (this key can only be turned on and cannot be turned off)

Action explanation: Only close (this key can only be closed and cannot be opened)

(Learn s-locking) Quickly pre the "Settings" on 5 times, and relay 1 will f. (Click the Settings on to change the relay number to be learned) At this time, long pre and hold one key on the remote control to learn one key. You can continue to pre all keys. After the operation is completed, you need to power off and restart;

(Learn to jog) Quickly pre the "Settings" on 6 times, and relay 1 will f. (Click the Settings on to change the relay number to be learned) At this time, long pre and hold one key on the remote control to learn one key. You can continue to pre all keys. After the operation is completed, you need to power off and restart;

(Learn to pre the lock) Quickly pre the "Settings" on 7 times, and relay 1 will f. (Click the Settings on to change the relay number to be learned) At this time, long pre and hold one key on the remote control to learn one key. You can continue to pre all keys. After the operation is completed, you need to power off and restart;

(Learning only opens) Quickly pre the "Set" on 8 times, and relay 1 and 2 will f simultaneously. Pre the "Set" on once to change to relay 1 fing (continue to click the "Set" on to change the relay number to be learned). At this time, long pre one key on the remote control to complete the learning;

(Learn only to close) Quickly pre the "Set" on 9 times, and relays 1, 2, and 3 will f simultaneously. Pre the "Set" on once to change to relay 1 fing (continue to click the "Set" on to change the relay number to be learned). At this time, long pre one key on the remote control to complete the learning;

(Learn to fully open) Quickly pre the "Set" on 8 times, and relays 1 and 2 will f simultaneously. At this time, one key of the remote control will learn to fully open, complete;

(Learn to fully close) Quickly pre the "Set" on 9 times, and relays 1, 2, and 3 will f simultaneously. At this time, one key of the remote control will learn to fully open, complete;

(One on in the learning area controls relay 2.3.8 at the same time): Pre the "Set" on 5 times, relay 1 fes, pre the "Set" on 1 times, relay 2 fes, pre the "Set" on 3 times, relay 2 and 3 f simultaneously, pre the "Set" on 8 times, relay 2.3.8 fes at the same time. At this time, pre and hold on 1 on the remote control until the relay light changes, release, power off, and restart, complete.

Additional function: Set relay 3 to jog for 200 milliseconds (note: if the indicator light is incorrect midway, power off and restart immediately):

(1) Quickly pre the "Settings" on 11 times, observe that the indicator light next to the settings on keeps fing 3 times, and relay 1 lights up,

(2) Pre the "Set" on once, and relay 2 will light up,

(3) Pre the "Set" on once, and relay 3 will light up,

(4) Quickly pre the "Settings" on twice and observe the indicator light next to the settings on fing at a constant speed,

(5) Pre once to set relay 3 to remain on,

(6) Pre the "Set" on three times, and relay 3 will jog for 100 milliseconds

(7) Pre the "Set" on three times, and relay 3 will jog for 200 milliseconds,

(8) Pre and hold the 'Settings' on for 2 seconds to save and exit, complete.

Repeat (5), (6), and (7) to reset, with a minimum jog speed of 50 milliseconds

(Reminder: You can continue the operation by preing 3 times above. Each time you pre 3 times, it increases by 100 milliseconds. If you pre 2 times, it increases by 50 milliseconds. If you pre 4 times, it increases by 1 second.)

● Factory reset:

Pre and hold for 10 seconds, observe that the indicator fes 8 times, and all are deleted succefully.

Support: Inching, s-locking, interlocking, timing, delay

Reminder:

Due to the continuous upgrading of the product, slight changes in the layout of the components are normal. If there are any mandatory requirements, please e notes and explain them. Please consult and communicate more before purchasing.