12V 24V MPPT Solar Charging Controller Smart Display 10

1. The industrial master chip is adopted, and the 16-level AD sampling accuracy, temperature, charging current, accurate real-time display, and power generation situation are clear at a glance.
2. Automatic focusing tracking charging, high charging efficiency, charging non-stop detection, two-way focusing tracking.
3. LCD screen with adjustable charging and discharging parameters. The ultra-wide charge and discharge can be adjusted. As long as you know the battery characteristics and set the corresponding charging parameters, you can charge all kinds of batteries (lithium battery and lithium battery). Please set the correct charging parameters.
4. Complete three-level charging management. Effectively protect the battery and more durable.
5. Built-in overheat protection. Overcurrent protection. Short circuit protection. Reverse connection protection. When the fault is eliminated, it will recover itself. It will not damage the controller

6. Bidirectional MOS anti-backflow circuit, high-power charging mode, ultra-low heating.
7. Dual DCS. O DC load output. Easy to connect
Product name: MPPT controller
System voltage: 12V/24V automatic adaptation
Rated charging current: 10A
Rated discharge current: 10A
Maximum PV voltage input:
12V system Less than 25V
24V system Less than 50V
Float charging voltage: b1/14.4V, /14.2V/b314.6V (regulation range: 13V-15V)
Low-voltage breaking voltage (LVD): 10.7V (regulation range: 9.5V-11V)
Discharge recovery voltage: 12.6V (regulation range: 11.5V-13V)
Standby current:Less than 10 mA
USB port: maximum 5V/2A
Working temperature: - 36~+60 ℃
Product size: 170 x 95 x 30mm
color:Grey
Material:ABS

Package Contents:
1 x MPPT controller

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.