12V wireless immobilizer car engine loligent Security Anti-Theft System Repable relay shaped device CHADWI501

Different vehicles have different relay shapes and need to be repd accordingly.Default model A ,if Model B unavailableModel A:Model B :CHADWIwirele immobilizer car engine lockFor 12V vehicle CAR LIGENT INDUCTION ANTI-THEFT SYSTEM Repable nondestructive installation relay-shaped automobile loanti-hiing deviceOutstanding features1. Car engine anti-theft device2. of automatic induction repment relay, invisible installation is not easy to identify3. No need to operate in automatic induction mode, you can switch between manual mode and anti-robbing mode4. No damage to the car line, fast and convenient installation5. After the flame is turned off, it will automatically cut off the , close to the vehicle and automatically open the oil path, the sensing distance is about 15 meters6. Anti-shielding and anti-interference technology, the chip is stable7. Only suitable for 12V oline vehiclesFeatures:I. The working prince of the unit-relay:■Start the engine for the first time: the unit starts scanning the r ID paword, which matches within 25 seconds, The car can be driven off succefully. If not succeful, the circuit will be cut off after 25 seconds, and the engine will stop.■Start the engine for the 2nd time: the unit shortens the scanning time to 20 seconds.■Start the engine for the 3rd time: the unit shortens the scanning time to 10 seconds.■Start the engine for the 4th time: Unit can not scan correct paword that it was started illegally.No matter how many times it is started, the unit can sense the correct paword before driving the car.■In the -lomode, the driving no longer scans the r ID,and the r needs to be sensed again after turning off.■In the anti-hiing mode, the unit will start normally after receiving the correct signal after starting the engine. If it does not receive the correct signal from the e control within 1 minute, it will turn off. Receive signals while driving.Electrical performance:1. e control: Static current is about 0mA, Working current is 5mA.Battery specifications: CR20322. Unit-relay :working current is about 20mA,load current : Model A  30A, Model B 40A, Model C 40A.Attention:1. The unit relay reps the vehicle relay without breakingthe wire. The vehicle only supplies power to drive theinternal control switch on and off when the vehicle is ignited,which will not affect other functions of the vehicle.2. The unit supports the start and stop function of the car,but the automatic induction mode must be turned on.3. It is normal for some models to illuminate the fault light during theunit test function. Generally, the automatic induction mode is turned on and it will be automatically eliminated after a few days of normaldriving.4. After some models are turned off, the relay will continue to supply power for more than ten seconds without affecting the use.After restarting, it will restart continuously. If the host cannot receive the signal from the e control, it will turn off.Note:THIS PRODUCT DOES NOT CONTROL THE DOORS AND DIRECTION LIGHTS OR OTHER PARTS, ONLY THE OIL CIRCUIT OR CIRCUIT.THE ENGINE CANNOT BE STARTED TO PREVENT THEFT.Tips: The difference between loand anti-hiing device1. lock: You can drive normally after receiving the signal from the e control, and it will not turn off during the driving. no need to re-sense the signal from the e control unle you turn on the engine after turning off.2.Anti-haing device: The signal from the e control is continuously received during the driving . If the e control signal is not received for more than 1 minute, the engine will immediately stop.3. The functions of the loand anti-hiing device are controlled by the hardware on the unit and need to be manually switched.Specifications:BOX SIZE:150**82*45MMWeight:0.13KGPackage Include,Product composition:Unit-Relay*1PCS, induction e control*2PCS,manual*1PCS