130000RPM Turbo Fan Silent High Power Jet Fan Speedy Brushless Motor Air Duster Type-C PD Fast Recharging Dust Blower Air Blower

Type A

This jet fan is simple in design, reasonable in structure, and powerful in performance, the peakwind speed is over 45m/s. Adopting 28.8mm diameter low voltage brushle high-speed motor, 8.4V working voltage, silent and strong wind. Built-in 13 large-sized fan s, which are machined by high-precise for high bility and efficiency. Unrivaled powerful airflow at 110,000rpm, one-on enhanced mode, pre and hold to starts, release on to stops. Adopts Type-C interface, supports PD fast charging protocol, energy saving design, and cost saving.Features:Pocket fan design, compact in size, easy to carry, with better utility and wider application scenarios.This fan is simple in design, reasonable in structure, and powerful in performance, the peakwind speed is over 45m/s.Adopting 28.8mm diameter low voltage brushle high-speed motor, 8.4V working voltage, silent and strong wind.Built-in 13 large-sized fan s, which are machined by high-precise for high bility and efficiency.Unrivaled powerful airflow at 110,000rpm, one-on enhanced mode, pre and hold to starts, release on to stops.Built-in 2pcs 18650 power batteries (the capacity of a single battery is 2500mAh), ennce, the highest grade can last up to about 15 minutes.Adopts 30A electronic speed control, low heat generation, 150W maximum power, and strong performance.Adopts Type-C interface, supports PD fast recharging protocol, energy saving design, and cost saving.Note:Fan of high power, the temperature will rise after full speed time running, please pay attention to rest or downspeed. Medium speed is recommended for long-term operation.When charging and discharging, please put it in a ventilated p, with no combustible materials around, if the wind speed is significantly reduced, please recharge it in time.Its housing is 3D printed DIY handmade, there are slight defects on the surface as a normal phenomenon.Specifications:Name: Jet FanMaterial: plasticsBattery: 2 * 18650 battery(included)Motor: 28.8mm brushle motorRotation speed: 110000rpmPackage size: 150 * 100 * 30mm / 5.91 * 3.94 * 1.18inPackage weight: 290g / 10.23ouncePacking List:1 * Jet Fan1 * Wind Nozzle

Type B

This jet fan is simple in design, reasonable in structure, and powerful in performance, the peakwind speed is over 45m/s. Built-in 13 large-sized fan s, which are machined by high-precise for high bility and efficiency. Adopting 28.8mm diameter low voltage brushle high-speed motor, 8.4V working voltage, silent and strong wind. The motor rotates faster, with 110,000 RPM of unrivaled strong airflow and the peakwind speed is over 45m/s. Adopts Type-C interface, supports PD fast charging protocol, energy saving design, and cost saving.Features:Pocket fan design, compact in size, easy to carry, with better utility and wider application scenarios. This fan is simple in design, reasonable in structure, and powerful in performance.Built-in 13 large-sized fan s, which are machined by high-precise for high bility and efficiency.Adopting 28.8mm diameter low voltage brushle high-speed motor, 8.4V working voltage, silent and strong wind.The motor rotates faster, with 110,000 RPM of unrivaled strong airflow and the peakwind speed is over 45m/s.Built-in 30A current regulator, with low heat generation, and strong performance, the maximum power is up to 150W.Support infinite speed regulation function, pre and hold the on to adjust the wind speed, release the on to stop.Adopts Type-C interface, supports PD fast recharging protocol, energy saving design, and cost saving.Built-in 2pcs 18650 power batteries (the capacity of a single battery is 2500 mAh), ennce, the highest grade can last up to about 15 minutes.Versatile utility fan with wider use scenarios, suitable for blowing, industrial dust blowing, soot blowing, keyboard cleaning, automobile and motorcycle cleaning, and so on.Note:Fan of high power, the temperature will rise after full speed time running, please pay attention to rest or downspeed. Medium speed is recommended for long-term operation.When charging and discharging, please put it in a ventilated p, with no combustible materials around, if the wind speed is significantly reduced, please recharge it in time.Its housing is 3D printed DIY handmade, there are slight defects on the surface as a normal phenomenon.Specifications:Name: Jet FanMaterial: plasticsBattery: 2 * built-in 18650 battery, 2500mAh(included)Motor: 28.8mm brushle motorRotation speed: 110000rpmPackage size: 150 * 100 * 50mm / 5.91 * 3.94 * 1.97inPackage weight: 310g / 10.93ouncePacking List:1 * Jet Fan1 * Wind Nozzle

Type C

This jet fan is simple in design, reasonable in structure, and powerful in performance. Powered by a brushle direct current high-speed motor with strong power, the maximum output speed is up to 130,000 RPM, which produces a strong wind speed of up to 52 meters per second, no out for loads. 3 gears of speeds adjustable, and you can adjust it according to the use demand. Suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, car center console cleaning, car crevice cleaning, foot mat crumb cleaning, picnic garbage cleaning, etc.Features:【Compact Structure】:Cordle fan is small and exquisite, compact and lightweight, and can be easily carried, with better utility and wider application scenarios and customized for tight spaces.【Premium Material】:This fan is simple in design, reasonable in structure, and powerful in performance. Made of ABS and silicone, fire and heat resistant, wear and corrosion resistant, with a service lifespan.【Brushle Motor & 130,000RPM High Speed】:The fan is powered by a brushle direct current high-speed motor with strong power, the maximum output speed is up to 130,000 RPM, which produces a strong wind speed of up to 52 meters per second, no out for loads.【3-speed Control & Infinitely Variable Speed】:3 gears of speeds adjustable, and you can adjust it according to the use demand. Eeasy and convenient to operate, greatly improving your cleaning efficiency.【Multi-functional Design】:It is a versatile cleaning tool for home, car, and office, suitable for cleaning car/home/office/seam corners, as well as quickly inflating various aircushions.【Built-in Lithium Battery】: Built-in 2pcs 21700 high-capacity lithium batteries(the capacity of a single battery is 3000mAh),, the theoretical tion (first gear) up to 4 hours, longer ennce.【Wide Applications】:Suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, car center console cleaning, car crevice cleaning, foot mat crumb cleaning, picnic garbage cleaning, etc.Specifications:Name: Jet FanMaterial: plastics+metalBattery: 2 * 33C 3000mAh 21700 battery(included)Charging interface: USBCharging time: 2.5hVoltage: 6-8.4VWind speed: 52 meters per second, 130,000 revolutions per minute, the wind can reach 16 levels 56m/sMotor: high-speed brushle motorGear: three gears adjustableUses: dust blowing, combustion, inflatableItem size: 143 * 93 * 39mm / 5.63 * 3.66 * 1.54inItem weight: 306.5g / 10.81ouncePackage size: 180 * 130 * 50mm / 7.09 * 5.12 * 1.97inPackage weight: 487g / 17.18ouncePacking List:1 * Jet Fan1 * USB Cable1 * Guideline

Type D

This jet fan is simple in design, reasonable in structure, and powerful in performance. Adopting a brushle motor, the 11-12W rpm high rotation speed design can provide strong wind with low noise. Support infinite speed regulation, wind power can be as big or as small as you like. Utilizing ul-high-speed bearings, capable of generating preures and speeds in exce of 45 m/s. Built-in 13 stainle steel s, which are machined by high-precise for high bility and efficiency. Adopts Type-C interface, supports 15W PD fast recharging protocol. Wide applications, suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, etc.Features:Pocket fan design, compact in size, easy to carry, with better utility and wider application scenarios. This fan is simple in design, reasonable in structure, and powerful in performance.The housing is made of PETG mixed carbon fiber, solid and delicate. Utilizing ul-high-speed bearings, capable of generating preures and speeds in exce of 45 m/s.Adopting a brushle motor, the 11-12W rpm high rotation speed design can provide strong wind with low noise. Support infinite speed regulation, wind power can be as big or as small as you like.Built-in 13 stainle steel s, which are machined by high-precise for high bility and efficiency.One on on/off, easy to use. Built-in 2pcs 21700 power batteries (the capacity of a single battery is 3000 mAh), ennce.Built-in 30A current regulator, with low heat generation, and strong performance.Adopts Type-C interface, supports 15W PD fast recharging protocol, energy saving design, and cost saving.Equipped with blue indicator light, LED light beads, power on automatically lightup, very beautiful.Wide applications, suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, etc.Note:Please don't use it for a time, prolonged use will cause the body to heat up. Please p it in a ventilated and cool p when charging.Specifications:Name: Jet FanMaterial: plasticsBattery: 2 * 21700 battery(included)Motor: brushle motorRotation speed: 110000rpmPackage size: 150 * 100 * 55mm / 5.91 * 3.94 * 2.17inPackage weight: 322g / 11.36ouncePacking List:1 * Jet Fan1 * Wind Nozzle

Type E

This jet fan is simple in design, reasonable in structure, and powerful in performance. Adopting a brushle motor, with 130,000RPM high speed can provide surging blowing/suction power, strong wind power, one on switch, and easy and convenient operation, with perfect dust removal effect. Suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, car center console cleaning, car crevice cleaning, foot mat crumb cleaning, picnic garbage cleaning, air-cushions inflating, etc.Features:【Fine Craftsmanship】:Cordle fan integrates suction and blowing functions, is small and exquisite, compact and lightweight, easy to carry, and customized for tight spaces. Made of PC and aluminum alloy material, with wire proceing surface, wear and corrosion resistant, can provide a service lifespan.【Blowing Suction Machine with Brushle Motor】:Adopting a low-noise and high-speed brushle motor, the maximum output speed is up to 130,000 RPM and can provide surging blowing/suction power. Strong wind design, one on on/off, easy and convenient operation, with perfect dust removal effect. Wind speed up to 52M/S, motor power up to 120W. With low heat generating, high efficiency, and stable working performance.【Multi-functional Design】:Equipped with blowing function and suction function. It is a versatile cleaning tool for home, car, and office, suitable for cleaning car/home/office/seam corners, as well as quickly inflating various air cushions.【Infinitely Variable Speed Design】:With a steple speed control function, you can adjust it according to the use demand, which is easy and convenient to operate, greatly improving your cleaning efficiency.【Rechargeable Lithium Battery】:Type-C charging interface design supports a 15W quicharging protocol. Built-in 8000mAh high capacity lithium battery, efficient cleaning without interruption, perfect for longer lasting use.【Wide Applications】:Suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, car center console cleaning, car crevice cleaning, foot mat crumb cleaning, picnic garbage cleaning, etc.Specifications:Name: Jet FanMaterial: PC and aluminum alloyBattery: built-in 8000mAh lithium battery(included)Rated output: 15WVoltage: 7.4VMaximum current: 30AMaximum speed of brushle motor: 130,000rpm±10%Maximum motor power: 120WFan quantity: 13pcsWorking time: 6-10 minutesItem size: 140 * 80 * 47mm / 5.51 * 3.15 * 1.85inItem weight: 297g / 10.48ouncePackage size: 165 * 115 * 50mm / 6.50 * 4.53 * 1.97inPackage weight: 425g / 14.99ouncePacking List:1 * Jet Fan1 * Charging Cable

This jet fan is simple in design, reasonable in structure, and powerful in performance. Adopting a brushle motor, with 130,000RPM high speed can provide surging blowing power, strong wind power, one on switch, and easy and convenient operation, with perfect dust removal effect. Suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, car center console cleaning, car crevice cleaning, foot mat crumb cleaning, picnic garbage cleaning, air-cushions inflating, etc.Features:【Fine Craftsmanship】:Cordle fan is small and exquisite, compact and lightweight, and can be easily carried. This fan is made of ABS and metal material, which is simple in design, reasonable in structure, and powerful in performance, with better utility and wider application scenarios, and customized for tight spaces.【Brushle Motor & Strong Wind】:Adopting a low-noise and high-speed brushle motor, the maximum output speed is up to 130,000 RPM and can provide strong blowing power. Strong wind design, one on on/off, simple and convenient operation, with perfect dust removal effect. Wind speed up to 52M/S, motor power up to 200W.【Multi-functional Design】:With a speed adjustable function, easy and convenient to operate, and you can adjust it according to the use requirement, which greatly improves your cleaning efficiency. Low heat generating, high efficiency, and stable working performance. With 150℃ over-temperature protecting function, when the temperature of the equipment exceeds 150℃, the fan will automatically stop running, effectively preventing the equipment from g damaged due to prolonged high-temperature operation, thus prolonging the service lifespan of the equipment.【 & Type-C Interface】:Built-in 3000mAh large capacity 18650 battery, efficient cleaning without interruption, with max 15 minutes ennce. Adopt Type-C interface, support 15WQC fast recharging protocol, energy-saving and cost-saving.【Wide Applications】:It is a versatile cleaning tool for home, car, and office, suitable for carbon fire blowing, industrial dust blowing, soot blowing, keyboard cleaning, car and motorcycle cleaning, car center console cleaning, car crevice cleaning, foot mat crumb cleaning, picnic garbage cleaning, etc.Specifications:Name: Jet FanMaterial: ABS and metalColor: black, grey(optional)Battery: 2 * built-in 3000mAh 18650 lithium battery(included)Voltage: 6-8.4VMaximum speed of brushle motor: 130,000rpmMaximum motor power: 200WCharging time: ＞2.5hItem size: 143 * 93 * 39mm / 5.63 * 3.66 * 1.54inItem weight: 307g / 10.83ouncePackage size: 150 * 150 * 50mm / 5.91 * 5.91 * 1.97inPackage weight: 310g / 10.93ouncePacking List:1 * Jet Fan1 * Nozzle1 * Charging Cable1 * Guideline

Shipping:

1.We guarantee to ship goods out within 24-72 hour after payment confirmation except holiday.2.We ship by China post,HKpost ,,,according to your choice when placing orders .3.If you didn't receive the item after 45 days,please feel free to contact us.We will e all our effort to resolve the problem.4.We are not responsible for delays causedby the customs, duties,taxes or other customscharges.

Warranty:

1.All it have 1 year guarantee.IF your purchase do not meet merchantable quality, fitne for purpose or match the description, We can e sure your iues are resolved .2.For wrongly-shipped it, Please contact us in 48 hours after delivery.We will arrange to deliver the correct it or return all your payment.3.For defective or faulty products,please take photos or videos,we would resend or after confirmation.