13506028 Tire Pressure Monitoring r For Opel Adam Ampera Antara As J K Corsa D E Insignia Meriva B Mokka Zafira C 433MHZ

Get Coupons Now!

Description:

Rep For Part Number:

13506028 13594222 13581560 25789964 20922901 13581561 1332725

Operating  Frequency:433MHz

Package Content:1 / 4 TPMS R

Application:

For Opel Adam (Bj. 2012-2017)For Opel Ampera (Bj. 2011-2017)For Opel Antara (Bj. 2006-2017)For Opel As J (Bj. 2009-2017)For Opel As K (Bj. 2015-2017)For Opel Corsa D (Bj. 2006-2017)For Opel Corsa E (Bj. 2014-2017)For Opel Insignia (Bj. 2008-2017)For Opel Meriva B (Bj. 2010-2017)For Opel Mokka (Bj. 2012-2017)For Opel Zafira C (Bj. 2011-2017)

Note:

1. If you can not e sure which item fit for your car,please send theVIN CODEto us confirm it before order.

2.【No r prograng Required】:

The Tire Preure r is 100% new and come pre-programmed specifically for your e/model/year of vehicle,need activate them by scal tool or "re-learning".

Simplified Relearn :IIrequired

*Installation of TPMS is recommended to be performed only by ined profeionals.

3.Installation Proce

Ⅰ. Loosen the tire: Remove the valve cap and core and deflate the tire.

Ⅱ.Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clorelative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.

Ⅲ.Dismount the r: With a screwdriver remove the fastening screw and r from the Valve stem, then loosen the nut and remove the valve.

Ⅳ.Mount r and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Aemble the r body against the rim and tighten the screw.

Ⅴ.Mount the tire: P the tire on the rim, ing sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.

FAQ

Q: How does the battery last?

A:About3years.

Q: Did they tpms r need to e program?

A:The Tire Preure r come pre-programmed specifically for your e/model/year of vehicle,need activate them by scal tool or"re-learning".

Q: How to "Relearn Procedure"?

A: Relearn.

Picture Details: