1500W DC Boost Module Electric Vehicle Boost Constant Current Charging Speed 12V-48V To 24V-70V With Fan

Product selling point

1. High conversion efficiency.

2. High-power components.

3. High-power and high-current iron-silicon-aluminum magnetic ring.

4. Increase and thicken the .

5. With intelligent temperature control electronic fan for heat diation.

6. Anti-re connection of the input MOS tube (the input is not afr of connecting to the board).

7. Input under-voltage protection (with LED indicator light, adjustable voltage).

8. Input over-current protection (with LED light indication, adjustable over-current point).

9. There is over-temperature protection (with LED light indication).

10. The output constant voltage and constant current are continuously adjustable.

11. High reliability and stable work.

The main parameters:

1. Product name: High-power DC boost module power supply.

2. Product model: AP-D5060B

3. Input voltage: DC10.5V-60V.

4. Input current: 50A max.

5. Input power: 1500W max.

6. Output voltage: DC15V-70V.

7. Output current: 30A max.

8. Output power: 1360W maximum.

9. Conversion efficiency: 93-96% (efficiency is related to input and output voltage and current).

10. Working temperature: -20~50.

11. Product weight: 850G

Main uses:

1. High-power solar street lamp driver.

2. Power supply for large electromechanical equment.

3. Various motors, such as two-wheel electric vehicles, three-wheel electric vehicles, etc.

4. Power supply for vehicles and various mobile devices.

5. DIY adjustable constant voltage and constant current power supply.

6. Solar and wind power charging.

7. Charge various batteries.

Instructions for use:

1. Input + is the positive pole of the power supply, and input-is the negative pole of the power supply.

2. Output + is the positive pole of the power supply, and output-is the negative pole of the power supply.

3. Undervoltage adjustable range: DC10.5V-44V (clockwise to decrease, counterclockwise to increase), first adjust the undervoltage to the minimum, then adjust the input voltage to the undervoltage protection value you need, and then re Slowly adjust the hour hand to increase, when it is adjusted to the under-voltage indicator light is on, call back one more circle, and then re-energize.

4. Constant voltage adjustable range: DC15-70V (clockwise decrease, counterclockwise increase), please adjust the voltage to the voltage you need when the output is no-load, and then connect the load (constant voltage power supply should be constant The flow is adjusted to the maximum,).

5. Constant current adjustable range: 2A-30A (turn down clockwise, turn up counterclockwise), first adjust the output voltage to the voltage required by the load at no-load (the no-load voltage should be 2-3V higher than the load voltage when the current is constant) , Adjust the current to the minimum, connect an in series with the output, and then slowly adjust the current to the current required by the load.

8. This power supply has input over-current protection function (the over-current point is adjustable), and the red light is on during over-current protection.

9. This power supply is equped with an intelligent temperature-controlled fan. When the temperature of the power supply reaches about 60 degrees, the fan is automatically turned on, and when the temperature of the power supply drops to about 50 degrees, the fan is automatically turned off.

10. The input voltage cannot be lower than 10.5V or exceed 60V (please reduce the load appropriately when the input voltage is lower than 12V).

11. The maximum input current cannot exceed 50A, and the power cannot exceed 1500W.

12. When using, it must be ensured that the input voltage is lower than the output voltage by more than 2V.

13. When using a switching power supply or other secry power supply, please make sure that the power of the power supply should be more than twice the power of this module.

14. When the power supply is over-current or under-voltage protection, the output still has a voltage close to the input value, and the protection is only that the power supply does not boost.

15. The output indicator will light up only when the power supply has a boost.

16. ant note: Please try not to use input below 20V, and output above 60V with full load. When the input and output preure difference is large, the output power should be appropriately reduced. The greater the preure difference, the lower the power supply efficiency.

17. Output with load descrtion: When inputting 12V (input current 50A, output below 60V, output can carry a load of about 550W), when inputting 24V (input current is 50A, output can carry a load of about 1100W), when inputting 36V (input current 41.6A, the output can carry a load of about 1360W), when the input is 48V (input current is 31A, the output can carry a load of about 1360W),

ant note:

1. The parameters marked on this power supply are all maximum values, and must not exceed the maximum value when used

2. The maximum value measured by this power supply is measured by pure resistance load. When using capacitive and inductive loads with large starting current, please pay attention to appropriately lighten the load.

3. The electric vehicle can be driven directly when the battery is input

12V input (can drive electric vehicles below 400W)

24V input (can drive electric vehicles below 600W)

36V input (can drive electric vehicles below 800W)

48V input (can drive electric vehicles below 900W)

4. Load capacity at different input voltages (pure resistive load)

At 12V input, the output can carry a load below 560W

At 24V input, the output can carry a load below 1100W

At 36V input, the output can carry a load below 1360W

Precautions:

1. When the output voltage is higher than 36V (safety voltage for the human body), please do not touch it with electricity to avoid electric shock to the human body.

2. The input and output cannot be red,

3. When inputting a large current, the terminal should be tightened, and the input line should be 4 square meters or more.

4. The output cannot be short-circuited. A short-circuit can easily damage the power supply, because it is difficult for the boost power supply to achieve output short-circuit protection.

5. When working, the input and output voltage and current can not exceed the maximum value, so as not to damage the power supply.

6. Pay attention to ventilation and heat diation when working with full load for a long time to extend the service life of the power supply.

7. Pay attention to dust and moisture.

Checklist

1*Boost module

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.