150W 10A Electronic Load 1.77inch TFT Color Display

This product is a direct current electronic load, with a maximum of 150W and a maximum load current of 10A. 1.77inch TFT color screen, cumulative running time, temperature with load, real time voltage, real time current, real time , cumulative capacity, cumulative energy, stop discharge voltage, stop discharge current, and load switch status indication display function. Voltage, current and overrun protections values can be set; and the stop discharge voltage and discharge time can be set. Supports voltage calibration and current calibration, and support zeroing of accumulated data. It adopts four-wire wiring method, which makes the voltage measurement more accurate.



Features:

This product is a direct current electronic load, with a maximum of 150W and a maximum load current of 10A.

1.77inch TFT color screen, with cumulative running time, temperature with load, real time voltage, real time current, real time , cumulative capacity, cumulative energy, stop discharge voltage, stop discharge current, and load switch status indication display function.

Voltage, current and overrun protections values can be set; and the stop discharge voltage and discharge time can be set.

Multifunctional design, the system menu interface supports voltage calibration and current calibration, and support zeroing of accumulated data.

The product works with a 12.0V1A independent supplys, with an intelligent temperature control system controlling the work of the heat sink fan. Active cooling, when the load current ≥3A or the temperature of ≥40 ℃, it will starts the fan.

Compared to traditional analogue electronic loads, it adopts protects first and then work mode to control the discharge, which can effectively protects the discharge supplys from damage caused by over-limit and over-discharge.

It adopts four-wire wiring method, the voltage measurement is not affected by the voltage drop of the wire, making the voltage measurement more accurate, when wiring, you only need to make the A+ and V+, V- and A- respectively short connection.



How to wiring:

① use thick wire to connect the supplys positive terminal to A+, the supplys negative terminal and A- connected, after connection, the voltage and current all displays 0.

② Use a thin wire to connect the positive terminal of the supplys to V+ and the negative terminal of the supplys to V-, and the real-time voltage shows the supplys voltage after connection.



Specifications:

Name: Electronic Load

Material: printed circuit board

Working voltage: 12VDC, 1A adapter

Display: 1.77inch TFT display

Load voltage: 0-150VDC

Load current: 0-10A

Load : 0-150W (above 120V max. 60W)

Wiring method: A+ V+ V- A- four-wire system, backward compatible with two-wire system

measurement ranges: 0-999999Wh

Capacity measurement ranges: 0-999999Ah

Cooling ways:

Control: 4 buttons control

Overvoltage protections: yes

Overcurrent protections: yes

Over- protections: yes

Over-temperature protections: yes, temperature≥80℃ stopping load

Time limit discharge: yes

-off data saving: yes

Zeroing of total data: supported

Item size: 48 * 100 * 110mm / 1.89 * 3.94 * 4.33in

Item weight: 325g / 0.72lb

Package size: 90 * 110 * 120mm / 3.54 * 4.33 * 4.72in

Package weight: 530g / 1.17lb



Packing List:

1 * Electronic Load