150W DC-DC Boost Converter 10-32V To 12-35V Step Up Power Supply Module Adjustable Step Up Voltage Charger Module

150W DC-DC Boost Converter Step Up Power Supply Module 10-32V to 12-35V Adjustable 10A Laptop Voltage Charge BoardFeature:1. Versatile Voltage Adjustment:This module has a wide input voltage range of 10-32V and an adjustable output voltage range of 12-35V, ing it ideal for a wide range of applications.2. High Output Power:With a maximum output power of up to 150W (when using a fan), this module can easily drive laptops and other devices with high power requirements.3. High Conversion Efficiency:The module boasts an impreive conversion efficiency of up to 94%, which means le d power and more efficient performance.4. Industrial-Grade Operating Temperature:Designed to operate in temperatures ranging from -40℃ to +85℃, this module is engineered to withstand harsh environmental conditions.5. Wide Application Range:This module can be used as a regulated power supply for electronic equipment, a power source for laptops and other dial devices, a battery charger, or as a system's primary power source. It can also be used to power projects that require a higher voltage than your input voltage.Specification:Module: Non isolated boost moduleInput method: IN+positive input, IN - negative inputOutput method: OUT+positive output, OUT - negative outputWiring method: solderle, terminalInput voltage: 10-32VOutput voltage: DC 12-35 V (adjustable)Output current: 6A (MAX)Input current: 10A (MAX) (If it exceeds 10A, please strengthen heat diipation)Output power:Free cooling 100W (MAX) with fan 150W (MAX)Easily drive a 65W 90W laptop, including a dual core 12V battery with a regular 19V 3.42A laptop, with a module temperature of approximately 45 degrees Celsius.Conversion efficiency: 94% (measured at 16V input and 19V output 2.) (for reference only)Working temperature: Industrial grade (-40 ℃ to+85 ℃) (If the ambient temperature exceeds 40 ℃, please reduce the power or add a fan)Full load temperature rise: 45 ℃No-load current: typical 25mAShort circuit protection: None (please install an overcurrent protector in the input)Input re protection: None, connected in series with two tubes at the inputSize: 65 * 23 * 56mm/2.55 * 0.90 * 2.20inchNet weight: 64gApplication:1. DIY has an adjustable output car power supply. Simply connect your 12V power supply at the input, and you can freely and continuously adjust the output voltage (14-35V), but the output voltage cannot be lower than the input voltage.2. Car laptop power supply. Connect the input to your 12V power supply, and adjust the output to the voltage of your laptop to work.3. Booster charger, you can use a 12V power supply to charge batteries above 12V, such as a 24V battery.4. To power your electronic equipment, as long as the voltage is adjusted to the voltage you need and the current does not exceed the rated current, it can work normally.5. The front power supply of the system is 10-18V when you are working on a certain project, and your system board requires a power supply of around 24V, which has a high power. Using ordinary DC-DC modules has a low power and can work directly without debuing, easily achieving high-power boost.Warm Tips:The output power of this module is influenced by various factors such as the front-end power supply and back-end load, in addition to the load-bearing capacity of the module its; The following data are the results measured by profeional equipment, without considering other factors. The power module is a type of electronic component, please purchase it with caution for those without electronic expertise.

Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.

1 x DC-DC Boost Converter[relateproductdetail/]