16S 30A 48V LiFePo4 Battery Protection Board BMS with Balan

Scope of application: 18650 lithium battery protection board, scooter, drift car protection board, solar street light, LED protection board, motorcycle lithium battery protection board, tricycle power protection board, power lithium battery protection board
Continuous Discharge Current: 30A.Instantaneous discharge current:100A. Charging voltage: 60V. Maximum charging current: 30A
Overcharge detection voltage: 3.75±0.025V. Overcharge protection delay: 100±30ms. Overcharge release voltage: 3.6±0.05V. Battery balance detection voltage: 3.6±0.025V. Battery balance release voltage: 3.6±0.05V. Battery balance current: 36±5A. Overdischarge detection voltage: 2.1±0.08V.Overdischarge detection delay: 100ms. Overdischarge release voltage: 2.3±0.1V. Overcurrent detection voltage: 150mV. Overcurrent detection delay: 10ms. Overcurrent protection current: 130±20A.
Overcurrent protection release condition: disconnect load. Short circuit protection condition: external load short circuit

Short circuit detection delay: 200uS
Short circuit protection release condition: disconnect load
Main circuit conduction internal resistance: less than 15mohm
Working current: less than 50uA
Sleep current (when the battery is over-discharged): less than 10uA
Temperature range: -30/+80°C
Connection Using:
1. First connect the B- line to the battery negative terminal (the B- line must be soldered with a short wire), and then connect the flat cable ( connecting the flat cable, be to unplug the flat cable from the board)
2. wiring from B-, connect B- to the negative electrode of the battery, connect the second cable B-1 to the first positive electrode of battery, and connect the third cable B-2 to the second positive electrode of battery, and the fourth cable B-3 is connected to the ird positive electrode of battery...and so on
3. Finally, measure whether the battery voltage is to the output voltage of the protection board, and the protection board works normally if it is .
note: Different batches, product appearance and color may be different, does not affect the use
Colour:silver + green
Material:Metal+PCB
Size:80 x 55 x 10mm

Package Contents:
1 x Protection Board
1 x Cable

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !