18650 Lithium Battery Capacity 2/4CH Automatic Internal Resistance Battery Power Module Type-C Interfac

18650 Lithium Battery Capacity 2/4CH Automatic Internal Resistance Battery Power Module Type-C Interface

2CH Battery Capacity :

Features:

The product supports 2- capacity and internal resistance measurement.
Supports separate charging and discharging, and supports up to 9 charging and discharging cycles in automatic mode.
Each is independent of the other, can be set up separately, independent operation, no interference with each other.
Strong battery clip, 18650 battery holder using compact battery holder, suitable for flat battery measurement.
Specialized battery charging chip control, maximum about 1A charging, full voltage 4.2V, charging current less than 0.1A stop charging.

:

Working voltage: DC 5V
Applicable batteries: meet the stop discharge voltage 2.5 ~ 3.5V, 2.8V start ~ 4.2V full of batteries are applicable
Power supply interface: Type-C power supply interface power supply and power cord provided
System language: Chinese, English
Test quantity: 2-way charging and discharging measurement
Internal Resistance Measurement: Support, using DC two-wire method to test internal resistance.
Charging function: support, full of automatic cut-off charging does not support lithium iron phosphate battery charging
Discharge function: Support, automatically stop when conditions are reached, discharge current is not adjustable.
Automatic charging and discharging: Support, the battery is fully charged at the end of automatic mode.
Cyclic charging and discharging: Support, 1~9 cycles adjustable only automatic mode support
Status Alert: Support
Heat dissipation mode: fan active heat dissipation
Overheating protection: Support
Stop Discharge Voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, adjustable in 11 steps.
Discharge current: maximum of about 1A non-constant current, non-adjustable, does not support independent nsformation
Charging voltage: special battery charging chip control, maximum about 1A charging, full voltage 4.2V, charging current less than 0.1A stop charging.
Power fai save: only save the setup s, do not save the measurement data
Product size: 188*50*36mm

Instructions for use:

1.Product switch on and off:
The product has no switch key, power on automatically turn on, power off shutdown
2.Language switching:
Live in the "menu / M" key and then power on, the screen displays the main interface, release the "menu / M" key, wait 10 seconds to restart after the shutdown can be
3. Switch display:
Each is independent of each other, do not interfere with each other, clithe " / CHN" on to switch the display , and can view the s of each , and set the s of each
4.Test internal resistance:
Install the battery, power on, wait for 10 seconds, display the battery voltage and internal resistance test results, this product uses DC two-wire method to test internal resistance, subject to the limitations of the test prince, may not be able to identify the battery, the internal resistance is always displayed in the case of 9999.
When the battery is not installed, the test circuit is disconnected, which is equivalent to the infinite resistance value, and the internal resistance shows 9999 millis.
5. Charging function not suitable for lithium iron phosphate battery charging:
Install the battery in the battery holder, adjust the mode to "charging" mode, cli"start/stop/R/S" to run the program; after the charging is finished, the status indication is complete; the charging process records the capacity, energy, charging time, charging metering capacity is for reference only, please take the discharging capacity as the standard
6. Test capacity:
Capacity test needs to be discharged, need to wait for time, capacity test is carried out through the resistance discharge, discharge resistance heat generated high temperature, do not touch directly with your hands to avoid s outside. Capacity test results are only the capacity measured during the test phase when the battery starts discharging and stops triering.
7. Battery capacity dividing and running cycle:
Capacity dividing and running cycle is a process of charging, discharging and recharging, the stopping voltage can not be lower than 2.8V, otherwise it can not be charged and the program can not run normally.
8. Data zeroing:
Shutdown, switch mode, capacity, energy, time data is automatically cleared to zero

Package include:

1*18650 Battery Capacity Internal Resistance

4CH Battery Capacity :

Data link: https://www.banber.com/gather/6374be9b2ee0e200077ec155

Features:

The product supports four- capacity and internal resistance measurements
It supports separate charging, separate discharge, and up to 9 charging and discharging cycles in automatic mode
Each is independent of each other, set up separately, operates independently, and does not interfere with each other
The 18650 battery holder uses a compact battery holder for flat-head cell measurements
Active fan cooling supports overheating protection
The DC two-wire method is used to test the internal resistance
Note: Charging of lithium iron phosphate batteries is not supported

Basic s :

Working voltage: DC5V
Applicable batteries: Batteries that meet the stop discharge voltage of 2.5~3.5V and the start of 2.8V ~4.2V are all applicable
Power supply interface: 2 Type-C power supply ports power supply and power cord are provided by thelves
System language: English/Chinese switchable
Test quantity: 4 s of charging and discharging measurement
Internal resistance measurement: Yes, the DC two-wire method is used to test the internal resistance
Charging function: Yes, full of automatic cut-off charging do not support lithium iron phosphate battery charging
Discharge function: Yes, it will stop automatically when the condition is reached, and the discharge current is not adjustable
Auto Charge & Discharge: Yes, the battery is fully charged at the end of auto mode
Cycle Charge & Discharge: Yes, 1~9 cycles can be adjusted only supported by automatic mode
Status Alert: Yes
Heat dissipation mode: Fan actively dissipates heat
Overtemperature Protection: Yes
Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, a total of 11 levels adjustable
Discharge current: up to about 1A current, non-adjustable, does not support independent nsformation
Charging voltage: controlled by a dedicated battery charging chip, charging at least about 1A, and fully charged with a voltage of 4.2V
Power-off saving: Only the setting s are saved, and the metering data is not saved
Product size: 150*103*36mm
Package size: 182*112*50mm

Shipping List:

18650 Battery Capacity Internal Resistance X1
Crowbar X1