18650 Lithium Battery Capacity DC Port 2.4-inch Color Screen Dial Battery Power Module DC5V 10A Automatic C

Product s:

Operating voltage: DC5V 10A standard bare metal, without power supply, overpressure must machine

Power supply interface: ①: DC5.5 high-current interface, ②: 5V positive and negative welding points

Power supply re protection: re protection, prohibit re power supply

①Automatic mode: program start ~ 4.2V charging stop voltage for charging, charging current is less than the stop current for 30 seconds, the first charging is completed ~ quiescent not charging and not discharging ~ discharge according to the stop voltage setting, the load voltage is lower than the stop voltage for 10 seconds, discharging is completed ~ quiescent not charging and not discharging ~ charging with the re-charging voltage as the stop voltage, re-charging voltage is set to 4.2V, charging current is less than the stop current for 30 seconds, the program is set to stop voltage. When the recharge voltage is set to

4.2V, the charging current is less than the stopping current for 30 seconds, the programme ends when the recharge voltage is not equal to 4.2V, the battery voltage reaches the recharge voltage, the programme ends, the recharging is completed, the programme ends, and the operation of the automatic mode is completed.

② charging mode: program start ~ charging voltage is set to 4.2V, charging current is less than the stop current for 30 seconds, the end of the programme charging voltage is not equal to 4.2V, the battery voltage reaches the charging voltage, the end of the program ~ charging is complete.

③ Discharge mode: programme start ~ load voltage lower than the stop voltage 10 seconds, programme end ~ discharge complete

④Activation Mode: For professional use only, s are not allowed to leave the field during use! Forced charging with charging stop voltage, it will not stop automatically, need to end manually.

Charging current: each independently maximum about 1A, and charging current is not adjustable.

Charging stop voltage: 3.7V, 3.8V, 3.9V, 4.0V, 4.1V, 4.2V total of 6 adjustable steps

Recharge stop voltage: 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 3.6V, 3.7V, 3.8V, 3.9V, 4.0V, 4.1V, 4.2V adjustable in 13 steps.

End current: 100mA, 200mA, 300mA adjustable.

Discharge current: each independently maximum about 1A non-constant current discharge, and discharge current is not adjustable.

Discharge stop voltage: 2.0V, 2.1V, 2.2V, 2.3V, 2.4V, 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 3.6V, total 17 adjustable.

Standby time: 1~5 minutes adjustable.

Status preview: support 8- status 1-screen preview.

Single- detail display: support

Single- charging and discharging curve display: support

Internal resistance : DC two-wire method, only for the same batch sorting ogy.

Heat dissipation mode: active heat dissipation

Overheating protection: Support

Cyclic charging and discharging: only support charging-discharging-charging 1 cycle in automatic mode, do not support multe cycles.

External test: support, can be discharged through the 2P terminal external, a single single time only and can only support the battery holder or external test in one, can not be used at the same time the battery holder and external battery test.

Battery re connection protection: re connection protection, prohibit re connection of the battery.

Product size: 37×110×310mm

Package size: 60×112×335mm

Data link: https://mp.weixin.qq.com/s/54bIE9IunVy7bZLAy99xNA

Packing list:

*1

Crowbar*1

Note:

Blais the default Chinese version

Green is the default English version

Chinese version can also be switched to English interface.