1pc Mini Step Down Power Module Converter DC-DC 4-24V 12V 24V to 5V3A,Default NO5250

Features:

1. Adopted imported chip.

2. With new design inside, the circuit design does not require electrolytic capacitors and tantalum capacitors (the electrolytic capacitor has a short life and the tantalum capacitor has the danger of explosion). The large-size solid ceramic capacitors (MCC) used in the high-end circuits are used.

3. Adopts synchronous rectification, and the circuit conversion efficiency is very high. When the 6.5V turns 5V 0.7A, the efficiency is as high as 97.5%, and when 12V turns 5V 1A, it also reaches 94%. Unlike the peers, the efficiency is only 60-70%. 

4. Adopt high current shielding inductance, ultra low internal resistance, increase the conversion efficiency and reduce the heat.

5. Ultra small size, 20* 11* 5mm.(L*W*H)

6. Ultra-low quiescent current, quiescent current 0.85 mA. Connected to the car battery without the need for a switch, can be connected to the cigarette lighter line, or ACC power line.

Module parameters:

Input voltage: DC 4.5-24V

Output voltage: integrated adjustable and fixed output, fixed output voltage on the back

Adjustable range (0.8-17V), fixed voltage (1.8V 2.5V 3.3V 5V 9V 12V)

Output current: large 3A (full load, please pay attention to heat dissipation), the actual test input 12V output within 1.5A without special treatment of heat.

Conversion efficiency: high 97.5% (6.5 to 5V 0.7A)

Operating temperature: industrial grade (-40Celsius to +85Celsius) (the higher the ambient temperature, the lower the output power)

Output overvoltage protection: none

Full load temperature rise: 40 Celsius

Quiescent current: 0.85 mA

Load adjustment rate: ±1%

Voltage regulation rate: ±0.5%

Dynamic response speed: 5% 200uS

Output short circuit protection: Yes, do not short circuit for a long time

Input reverse connection protection: none, input reverse connection protection diode

Enable control: Yes, high level operation, low level stop working, high level is 2-5V, low level is 0V or so. The default internal pull-up to input positive.

Wiring method: welding

Input method: welding

Output method: welding / pin header

Welding hole spacing: 2.54 mm

We confidently assure you'll be satisfied with what you get.However, If  there's a chance that you are not satisfied with our goods or something else, please let us know before leaving us a Negative feedback. We will try our best for 100% customer satisfaction. Your 5-Star Positive Feedback is much appreciated to us, and your satisfaction is our greatest motivation to move forward.Welcome to Shop Here! Want more Items? Please come & visit our SHOP.

*Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 5 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).Your satisfaction is our first priority.

*If you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.