2" 52mm Car Motorcycle LED Level Moto Meter Level r 12V /24V Aluminum Alloy Car Styling

Description:

and High Quality

Case Material: Iron

Size: Diameter 52 mm, High 28 mm

LED Display: Red (1), Yellow (1), Green (8)

Connection Description:

Blawire connect to the positive supply (+ 12V)

Green Wire connect to the negative power supply (-12V)

Yellow wire connect to the r

Installation：

1. Bla+12V connect Power Positive

2. Green -12V connect Power Negative

3. Yellow Wire connect Oil can r(must not connect with the test wire, or this is inaccuracy)

ant:

Green means the display of LED has a red / yellow / 8 green

Blue is the indication that the LED has a red / yellow / 8 blue

This product must be used with the oil capacity r (that is, oil float)

Attention:

Red wire function: It is adjustable resistance for oil adjusting,

do not need to use it at normal circumstances, if the oil amount is not

display accurate, the red wire can be used to adjust the oil amount.

Note:

This product must be used together with oil r (namely, oil floater)

This product not have waterproof functions

The item can use for Car,Motorcycle or by your need!

Connection mode：

1.BlaWire :Positive electrode

2.Green Wire:It is ant to note that the signal line must be pulled directly from the oil buoy and cut off the line ly connected to the instrument aembly.Otherwise,the oil meter is absolutely inaccurate

3.Yellow Wire:Connected r

Adjustment mode

1.And the positive and negative power lines must be well connected.Connect the yellow signal line to the r.

2.Fill up the ,turn on the power supply,and then slowly adjust the potentionmeter with a screwdriver so that all 10LED lights have just turned on

3.After adgusting the first time you have to pay attention to observation,no oil when a few lights,if there is a light to re-adjust the so that all the lights just went out.

Package Including:

1x Car