2 pcs Infitary 3 Colors Changeable LED Car Headlights 3000K 4500K 6500K 80W For Auto Lights H7 F H1 H8 H9 H11 9005 9006 H4 2000LM

Car Tricolor LED Headlight 3000K 4500K 6500K.The point of this product: the three-color temperature is suitable for any weather.6500K for sunny day, 4500K warm for foy day, 3000K yellow for rainy day, free to switch.The peneting power is very strong and the yellow light of cars will not be dazzling.360 degree clear beam no blind zone.Small Body Size, Easy To Instal, Plug & Play!s:LED : CSP 1860Voltage: 12VPower: 80W/PairLuminous Flux: 20000LMLifespan: >30000 Hourerproof: 67Color Temperature: 6500K Cool , 4500K Warm , 3000K Yellow (Three/Two colors in one ).Heat Diation: Aluminum + high speed quiet fanApplication: Car Headlights/Fog lightsPackage Included: 2*LED s,1*Manual

Introduction of different sockets:H4/ H13 /9004 /9007 : Hi/Lo Beam(Dual Beam).High beam:Only 6500K. Low beam: 3000K/4500K/6500K!!!H1/ H3/ H7 / H8 H9 H11 / 9005 HB3 / 9006 HB4 /880 H27 : Single Beam. 3000K/4500K/6500K!!!Please chethe plug type and plug size can fit for your car before your purchase. ThanksHow to change color :Turn on the lights for the first time, s (3000K, 4500K, 6500K).In the light-on mode, the time interval between turning off the light and turn on and then turning it baon is 0.3-6 seconds.For example:1 turn on the switch : 3000K Yellow light up ,then turn off the light !( Hi/Lo Beam don't have this color when it is on high beam!!!).2 turn on the switch : 4500K Warm light up ,then turn off the light !( Hi/Lo Beam don't have this color !!!).3 turn on the switch : 6500K Cool light up ,then turn off the light !The colors appear out of sync proceing method:The synchronization can be reset by turning on and off the power supply continuously and quickly for more than 6 times, and the switching time is le than 1 second.Step 1: Turn off the LED light and then turn on the LED light within 1 cecond.Step 2: Turn off the LED light and then turn on the LED light within 1 cecond.Step 3: Turn off the LED light and then turn on the LED light within 1 cecond.Step 4: Turn off the LED light and then turn on the LED light within 1 cecond.Step 5: Turn off the LED light and then turn on the LED light within 1 cecond.Step 6: Turn off the LED light and then turn on the LED light within 1 cecond.Then the two sets of lights return to right state.

Attention:

1. e sure choose a right socket type before order. So you'd better cheit on the web or just send inquiry with your car information, it's happy for us to cheit for you.2. It is suitable for most cars, not 100% error free. If it does not work ar installation, please try 180° re the plug and reconnect. If it is flickering or has any error. it may be caused by the different current. Because our energy-efficient LED headlights require le current than halogen or xenon s, then you need to install a pair of s to soe the problem.

Installation Precautions:

1. Put the vehicle into park or e sure it is securely in gear.2. e sure to have the ignition turned off and the keys removed.3. Be careful to avoid s, especially when turning on or off the vehicles lighting.4. e sure not to touch the lamp bead with your fingers, so as not to stain or even damage it. Do not pre the fan to avoid damage to the fan.5. Pay attention to the positive and negative.Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting probl.6. e certain that the end of the does not come in contact with the interior light shield of the headlight when adjusting the ,The wires of the lights should be facing down.7.It is best to install a dust cover to prevent dust from affecting the headlights service life.