2.6 inches DMG GB high brightness LCD and shell for Gameboy GB,GB IPS LCD screen. Simple installation, plug and play

Do not insert the same side of the cable at both ends into the cable holder. As shown below. Inserting a re cable like this will out the main chip of the LCD screen!!!

Video Installation Tutorial

https://b23.tv/FR5JwKq

Product features:

2.6 inch IPS LCD screen, plug and play.

Support for custom colors.

Support Chinese and English system menus.

An accurate battery level prompt bar can be displayed above the LCD screen. The disadvantage is that the power light cannot dim when the battery is low.

Support pixel display.

Support to save 7 customized colors.

Function introduction of LCD adjustment dial:

Pre it vertically for 1 second, and the top of the LCD screen displays the power bar.

If the battery bar is not displayed after preing, it indicates low battery.

Pre vertically for 3 seconds to pop up the saved color settings, move up and down to select, and pre vertically to confirm.

Pre vertically for more than 5 seconds until the custom menu pops up. Move up and down to select, and pre vertically to confirm.

Tole up or down to adjust the LCD brightne.100 level brightne adjustment, with mild brightne change. Long pre, the backlight will change significantly.

Tole the switch upward and turn on the power switch. Factory settings can be restored.

:

Game color 0 is the background color, game colors 1 and 2 are the main colors of the pattern, and game color 3 is the font color and image stroke.

0 recommended setting R63 G63 B50, 3 recommended setting R0 G0 B0.

Example:

0 R63 G63 B50

1 R47 G47 B47

2 R31 G31 B31

3 R0 G0 B0

The red power light cannot dim when the battery is low.

Battery condition, please check the battery level prompt bar.

When the dial is preed and the battery level prompt bar is not displayed, it indicates that the battery level is low.

Installation tutorials and precautions:

Do not the LCD screen. Do not pull the LCD flat cable. Do not wipe the LCD screen.

The welding of the dial is not very firm.

Do not pre the dial until the GB console housing is installed.

To avoid the broken dial caused by the wrong direction of force.

Please test before installation

Apply tape to the metal shell of the dial to avoid short circuits.

There may be a short circuit here, causing the lid to close and the LCD screen to not start.