200V 150W Adjustable Constant Current Electronic Load Battery USB DC 12V 24V Lead- Lithium Discharge Capacity Meter

ATORCH 150W Constant Current Electronic Load 200V20A Battery Discharge Capacity meter 12V24V48V Lead- lithium

Can used us plug and Eu plug!

Test the 18650 battery

Use of introduction and specifications:

Descrtion for Function Key :

1)Keep Pre long time the key: Zero all data(mAh,Wh,00:00:00) 2)Double-click the key: for the Capacity data reset to zero 3)Three-click the key:for the electric quantity data reset to zero 4)Four-click the key: for the time data reset to zero 5)Five-click the key: Auto-Standby Mode & Timer for discharge alert 6)Single-click to change the window, entering the setup window for high&Low Voltage background light, adjust the by double-clicking or three-clicking, click-holding for continuous and quick adjust. 7)Without load,quickly click the key for 7 times, for current data reset to zero(0.00A).It is for Precise calibration in local cirstance, so that the small current could be precisely measured. 8)Keep preing the key when power-off, then power-on, entering the Background setup window for High&Low Voltage over-load, single-click or double-click to adjust the , keep pre the key long time to reset to the default setup (Note: Please don't calibrate the voltage or current if without standard instruments) Instruction for Connection and Operation : 1) Open the package, insert the power adapter into the end of the product and supply the power. 2) Anti-clockwise rotate the two current knobs to the lower limit. 3) Connecting the Power Supply under test to the product according to the diagram above, and the current Input Voltage value will be read out. Keep preing the key to reset all data to zero; 4) Slowly clockwise rotate the two current knobs (coarse&fine) to adjust the current to the rating value of the Power Supply(The current should be slowly adjusted, using the fine knob priority, the coarse knob could be only used under large current condition.) 5) When testing the battery, Low voltage discharge limit should be set up, to avoid the poible damage caused by over discharging while discharge capacity test of the battery. SPECIFICATIONS: Supply Voltage/ Interface：DC6~12V / DC 5.0 or Micro USB Voltage measure Range：0.00V~200V Accuracy：0.05V Current Adjustable Range：0.00A~20A Accuracy：0.05A Capacity measure Range：0~999.999Ah Accuracy：0.01Ah Power ulative range：0~99999.9Wh Accuracy：0.01Wh Power measure Range：0~2999.99 W Accuracy：0.01W Impedance measure Range：1~999.9 ohm Accuracy：0.01 Temperature Range ：0~99℃ Accuracy：1℃ Max Timing：999H59M59S Accuracy：1S Cooling Fan Power：45℃ Input/Output：20A biting screw + USB Refresh time：>500mS/time measure rate：about 2s/time Over voltage and over current alert method：Display warning window and voice warning Protecting Voltage setting Range：1~300V Low Voltage setting Range：0~149V Protecting Current setting Range：0.2~100A Protecting Power setting Range：185W Display Type：Micro power consumption, LCM module, black font, green backlit, Chinese&English Size：160x95x60mm Consumption Current：36V, please attention to safety! Avoid electric shock 3) Several Powers should not be connected at the same time, avoid the over voltage or current to damage your power supply. 4) Slowly adjust the current while observing the displayed value, avoid the instant large current overloaded. 5) Be sure to obey the law of conservation of energy, the product of the voltage and the current should le than 150W. end！

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.