220V 800W Electric Welding Machine Heating Tool Welding Head Set For PPR PB PE PP Plastic Tube Welder Thermostatic Hot Melt

{infomodule}

#32 type SPECIFICATION Material: ABS+Aluminum Color: Green Power: 800w Suitable for: PPR / PB / PE pipe Heating temperature: 280℃（536℉） Welding head: 20mm /25mm /32mm Voltage: 220v (Please make sure it is suitable for your local voltage standard !!!) Plug Type: CN Plug (We will send you a local adapter plug for using)

PACKAGE INCLUDED 1 x Pipe Welding Machine 6 x Welding head (2pcs 20mm + 2pcs 25mm + 2pcs 32mm) 3 x Screw 1 x Wrench 1 x Storage Box Instruction is not included. Hope a nice day!

#63 type SPECIFICATION Material: ABS+Aluminum Color: Green Power: 800w Suitable for: PPR / PB / PE pipe Heating temperature: 280℃（536℉） Welding head: 20mm /25mm /32mm /40mm /50mm /63mm Voltage: 220v (Please make sure it is suitable for your local voltage standard !!!) Plug Type: CN Plug (We will send you a local adapter plug for using)

PACKAGE INCLUDED 1 x Pipe Welding Machine 6 x Welding head (20mm /25mm /32mm /40mm /50mm /63mm) 3 x Screw 1 x Wrench 1 x Storage Box Instruction is not included. Hope a nice day!

FEATURES Designed for prolonged use. Non-slhandle, comfortable to grab. Suitable for pipe construction equipment. For welding PPR / Pb / PE pipes, such as plastic pipes and so on. U-shaped base design increases the load-bearing effect and works stably. Widened and thickened panel design to store more heat and quickly melt the tube. Double-sided heat diipation design of the heat sink, no machine burning after working for a long time . Thickened thermal insulation scorched wood PP material, double thermal insulation, stable heat generation.

INSTRUCTION 1. Install the on the fixed welding device, place the welding device on the rack, install the corresponding heating die according to the required pipe specifications, and use the spanner to tighten, usually small in the front end in the back. 2. Power on: power on (pay attention to the power must be with a ground protection line), the green indicator light, until the green light is off, the red light is on, indicating that the fuse into the automatic temperature control state, you can start operation. Note: In the automatic temperature control state, red light, green light will be alternately lit, indicating that the fuse is in a controlled state, does not affect the operation. 3. Welded pipe: pipe with a straight cut off the pipe, the pipe and pipe at the same time without rotating into the fuse die, and in accordance with the requirements of the table to operate, to the heating time immediately after the pipe and pipe removed from the die at the same time , Quickly and without rotation directly into the required depth of uniform, so that the joints open into uniform flange.

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.