25ML 3MPa PTFE Lined Hydrothermal Synthesis Reactor High Vessel Tank

Baground:
Hydrmal synthesis reactor, also known as estion, melting s, hydrmal synthesis reactor, high temperature and estion vessels, PTFE high- tank is in a certain temperature and conditions, certain synthetic chemicals sulied reactor.
It is widely used new materials, energy, envnmental engineering and fields of scientific research and experiments, is university teaching, scientific research units comm used small reactors.

Feature
- High-quality stainless steel processing. Kettle kettle lid body and sealed with durable, reliable cable seal structure, the sealing effect long-term stability without leakage.
- The hydrmal synthesis reactor with external heating, to reduce the volume and more favorable reaction in the same reactor operating temperature (such as multle reactor placed in an oven heated).

Specification:
Material: Stainless steel
Operating temperature: 230c
Working : 3MPa ()
Heating, cooling rate: 5 c / min
25,50,100,120,200 ML customized according to user needs.

Methods of operation
The reaction means and the reactor body, and to ensure feeding coefficient is less than 0.8.
When the Department of corrosive reaction when you want to put PTFE bush, can be ured kettle body from corrosion.
Hydrmal synthesis reactor will be placed on the heater, in accordance with the provisions of the heating rate of heating to the desired reaction temperature (less than the required safety temperature).
Completion of the reaction will be when its cool, but also in strict accordance with the provisions of the cooling rate operation, to facilitate the safety and reactor life. When confirmation of intra- temperature below the boiling point soents reaction system can open the tank lid after a follow-up operation.
Hydrmal synthesis reactor each time after use to clean, to avoid corrosion.
Kettle body, kettle lid seal line to pay particular attention to clean and prevent damage to the ps.and prevent damage to the ps.