2A Mini DC-DC Boost Buck Converter 12V To 5V 3.7V 5V To 12V Step-up Step-down Board Power Voltage Regulator Module

2A Mini DC-DC Boost Buck Converter 12V to 5V 3.7V 5V to 12V Step-up Step-down Board Power Voltage Regulator Module

Descrtion:

1. Using high-quality materials, the quality is guaranteed

2. Simple and convenient to use

3. Good product performance

4. The appearance of the product is exquisite and small

5. Wide application

Parameter:

Output voltage range: 3V~5.5V, the input voltage needs to be lower than the set output voltage

The output voltage can be set to 5V/8V/9V/12V, the default is 12V

Output capability: when input by 3.6V lithium battery, it can output 5V1.5A, 8V1A, 12V0.8A;

When input at 5V, it can output 8V1.2A, 9V1.2A, 12V1A

When the default 12V output, the LED indicator consumes about 1mA (the input current is about 3mA)

If the indicator light is turned off, the input current is le than 1mA at no load

Product size: 2.7*1.7*0.46cm

Voltage setting instructions:

The words A and B can be seen on the front of the . Use an electric iron to change the on-off of the pad next to the character to change the output voltage.

A: Disconnect B: Disconnect VOUT 5V

A: Disconnect B: Connect VOUT 8V

A: Connect B: Disconnect VOUT 9V

A: Connected B: Connected to VOUT 12V

The pad next to the LED indicator can also be disconnected to turn off the indicator

Package List:

1 x Boost module

Product selling point:

1. Using high-quality materials, the quality is guaranteed

2. Simple and convenient to use

3. Good product performance

4. The appearance of the product is exquisite and small

5. Wide application

Parameter:

Output voltage can be set to: 3.3V/5V/7.3V/9V, default 9V

Input voltage range: 4.5~16V. The input voltage should be about 1V higher than the set output voltage. For example, if the output is set to 5V, the input voltage should be higher than 6V.

Output capability: when 12V input, it can output 3.3V2A, 5V2A, 7.3V2A, 9V1.8A

When the default 9V output, the LED indicator consumes about 1mA of current

If the indicator light is turned off, the input current is le than 1mA at no load

Product size: 2.5*1.2*0.5cm

Voltage setting instructions:

The words A and B can be seen on the front of the . Use an electric iron to change the on-off of the pad next to the character to change the output voltage.

A: Disconnect B: Disconnect VOUT 3.3V

A: Off B: On VOUT 5V

A: On B: Off VOUT 7.3V

A: On B: On VOUT 9V

The pad next to the LED indicator can also be disconnected to turn off the indicator

Package List:

1 x Step-down module

About shping
Shping and Pack All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.