2pcs A/B/C/D/E Type Car Spring Autoer ShoAbsorber Spring Compress Bumper Power Pressure Bearing Top Rubber Auto ers

Notice

Please chethe size and purchase the product. If you don’t know how to determine the suitable style, you can leave a meage to give your car’s brand + year + front wheel/rear wheelDescription：Material: high quality rubberSuitable models: 99% models can be usedFeature1. Adopting the ering prince, the shoabsorption performance is obviously improved. The shoabsorption effect can e the car's riding comfort to a higher level, especially in the pits and hurdles.2. When paing non-asphalt roads, bumpy roads, and ing sharp turns, the stability is significantly improved.3. To resin the ion of the vehicle body from uneven road surface during driving, thereby reducing the ion noise during driving.4. Appropriately increase the height of the car body and improve the paing performance of the car on road obstacles.5. Protect the shoabsorber and suspension system, extend the life of the car shoabsorber, and prevent the shoabsorber spring oil seal from g damaged due to exceive bumpsInstalling steps1. Use a to lift the wheel into the air2. Wipe the shock-absorbing spring clean with clean water (wipe several times) to ensure that the spring is clean and free of grit, which will reduce the life of the shoabsorber.3. Coat the damping spring with soaked , and spread the soaked in the groove of the strong er; wash your hands and install the strong er into the spring (install the upper groove first, then install the lower For the groove, you can also install half of the upper and lower grooves first, and then rotate to install the rest until the springs are all in the groove, and the exce part can be cut off with a ).4. Finally, after installation, turn its notch to the middle of the inner side, e sure that the springs are in the groove, and then put down the body.Packing2pcs Spring er