2PCS/LOT Japan Nidec 20S Built-in Driver Outbound 20W Brushless Motor 5V-12V Miniature Fan Brushless Motor-Two Motors

New stoJapanese nidec smart 20S series brushle motor, built-in drive, PWM speed regulation. The appearance of the motor is very mini outer rotor, the power is very powerful, the rated power is 20W, the appearance of the motor is relatively thin, and it feels very suitable for changing violent fans or various DIY drive motors. The torque of the outer rotor motor is still very good, and the motor drives use independent MOS tubes. , Non-single-chlow-power drive, the maximum load current of 12V voltage is about 1.6A.

The motor is rated at 12V DC, and the measured 5-12V can run. Brushle motors that can support low-voltage 5V are rare. The PWM speed control signal is a 5V pulse signal. If you only need to run the PWM line and the start line at the highest speed and connect a 10K in series to the positive pole of the power supply, you can do it. The PWM speed control board in the picture introduction needs to be purchased separately. Output a high level, so the motor will rotate at high speed for about one second when it is powered on.

The motor also has a signal output. Those who understand the microcontroller can do closed-loop control to achieve high-precision control of the speed. The signal output needs to be pulled up by a of about 10K and needs a positive potential.

Although this motor does not have a forward and re socket line, there are already forward and re switching points on the main board. As long as you short two points with a line, you can choose the rotation direction you need, which is very convenient. See the description picture for details.

Note that the positive and negative poles of the brushle motor power supply cannot be red, otherwise the drive will be burned out.

The motor power supply and the PWM speed control signal must be connected at the same time to rotate. The motor will not rotate after the motor power supply is connected first and then the PWM speed control signal is connected. After the motor is running, do not adjust the speed to the minimum until the motor stops, otherwise Need to restart the power to turn.

Although the motor is packaged in the factory, it is estimated that the inventory time is relatively long. There are very few motors with slight rust in the middle of the bottom plate. The pictures are marked with close-up, which has no effect on the performance.

The actual test speed of the motor is as follows, and the maximum load current is as follows:

5V voltage: no-load current 0.2A, speed 7000 rpm.

12V voltage: no-load current 0.37A, speed 16000 rpm.

The motor weighs about 30 grams.

A 5P socket power cord is included at random for wiring testing. The color of the line is random. Be sure to read the introduction label to confirm the positive and negative poles, and do not look at the color of the wire to determine the positive and negative poles.

About shipping
Shipping and PaAll itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedbafor the transaction.