2X DC12V XH-W1219 High Quality NTC r Switch Regulator r Module Temperature Controller Thermostat

Module: XH-W1219Function: Temperature ControllerPower Supply: DC12V100% and High QualityPlease pay attention for your first use. You need wait 6s after your setting data, the module will save the date you have set after 6s.Short pre on SET: If you start the time setting mode , Nixie tube will blink. You could adjust the time T1 and T2 by on+ and on-. Please wait 5s after your setting date, the module will save the date you have set after 5s.pre on SET: if you start the setting mode. There are two group for your choice : P0 and P1. You could switch P0 or P1 by short pre SET. Under the P0 and P1,you could set the timing mode by the on+ and on-.P0--0: timing mode is 0--999 seconds; P0--1: timing mode is 0--999 minutes; P0--2: timing when the pattern is 0--999; P1--0: T1 time delay relay (T1 timer); P1--1: T1 delay time relay releases (T1 timer)P1--2: time delay relay after T1 (T1 timer), then the delay time T2 succeor electrical release (T2 timing) ends.P1--3: T1 delay time relay releases (T1 timer), then the delay time T2 succeor Electric energized (T2 timing) ends.P1--4: time delay relay after T1 (T1 timer), then the delay time T2 succeor electrical release (T2 timer), repeat the cycle.P1--5: T1 delay time relay releases (T1 timer), then the delay time T2 succeor Electric energized (T2 timer), repeat the cycle.Colour: greenMaterial: plasticSize: 60x44mmPackage Contents:2 x r ModuleOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.