3 In 1 Two Pins Digital Wood Moisture Meter Handheld Large LCD Display Wood Timber Moisture Humidity Meter Detector

3 In 1 Two Pins Digital Wood Moisture Meter Handheld Large LCD Display Wood Timber Moisture Humidity Meter Detector

Points:

1、Humidity r: Multifunctional Moisture Detector can test the moisture content of wooden materials, walls,

cement bris, cardboard, etc. Quily determine whether it is wet or dry, and take preventive remedial measures.

2、Simple Measuring: Equped with 2 high-precision pins. You just need to penetrate into the materials that

need to be tested. And then the Wooden Moisture Meter can quily give you the moisture level in building materials.

3、Detailed Designs: The Multifunctional Moisture has a non-sl handle, which is

convenient to carry. The large balit LED screen is easy to read. If the on is not

operated within 5 minutes, the meter will automatically cut off to save battery power.

4、Wide Range: The Moisture Detector is specially designed for the measurement of wooden

materials, construction, and paper and the current ambient temperature. It is suitable for

carpentry, building construction, agricultural repair, and floor laying, and other ocns.

5、Neceary Reminder: Please stay away from this sharp to avoid injury to children.

When not in use, please close the protective cover tightly. Please ensure that the instrument

is used and stored in an insulated, dry, and dust-free area. Clean properly on time.

Measurement instructions:

1. Remove the battery cover, install 2 AAA dry batteries, and pre the power on once to turn on the hine.

This product has a blue balight after it is turned on, which can be clearly displayed when the light is insufficient.

2. Remove the electrode needle cap to expose the electrode needle.

3. Pre the "Wood" on to select the appropriate wood calibration scale A, B, C, D (please

refer to the wood calibration table at the ba of this guide) to measure the corresponding wood.

4. Pre the "Paper" or "Wall" key to select paper mode or wall mode. Paper mode

is used to test paper/cardboard/carton. Wall mode is used to test thin slate/wall board/floor.

5. Insert the needle into the material and read the currently displayed data. Pre and

hold the HOLD/C/F key once to lo the display reading.

6. Read the current ambient temperature. Pre and hold the HOLD/C/F key for 3

seconds to switch between Celsius and Fahrenheit.

7. Pre the power on once to turn off the power of the instrument.

Specifications:

Princle: Resistive Wood range: 4~75% Paper range: 4~90% Wall range: 0.2~24% Resolution: 0.1% Accuracy: ±0.5% Electrode length: 10mm (0.4") Electrode needle: integrated Automatic shutdown: after the on is not operated for 5 minutes Power supply: 2 AAA batteries Product material: ABS Operating temperature: 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit) Product size: 144 X 64 X 31mm (5.7" x 2.5" x 1.2") Product weight: 130g

List:

1*Moisture meter (without battery) 1*Instruction About shping
Shping and Pa All it will be double cheed and well paed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the paage to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedba, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at cheout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbaYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedba for the transaction.