35W 2000LH 6.56ft Aquarium Bottom Suction Submersible

Features:

【Bottom Pump】Triple filtration function, mechanical, chemical and biological filtration; naturally circulate water flow to increase dissolved gas and oxygen content in water; suitable for both freshwater and seawater.

【Max. Flow Rate】Maximum Flow Rate: 2000L/H,high lift: 2m/6.56ft, high efficiency motor for energy saving.

【High-quality】Made of high-grade material, which is wear-resisting, non-toxic, safe to use.

【Quiet Design】The reliable and durable motor does not make much noise, providing you a quiet environment.

【Built-in Chip】Temperature control chip can prevent the water pump from being damaged by dry burning.

【Accessories】2 nozzles(16mm/19mm) and 4m water tubing. The bigger nozzle, the bigger output; the smaller nozzle, the higher lift comparatively. The water pipe can connect the nozzle for drain water.

【Compact Size】The exquisite size makes the pump easy to hide or disguise in the water.

【Applications】This bottom filter submersible pump can be used for fish tanks, aquarium, fountain, hydroponic systems, cooling and circulation systems, etc.



Specification:

Plug Type: US/EU (Optional)

: 35W/55W (Optional)

Voltage: 110V (US Plug), 220V (EU Plug) , 50Hz

Noise: 35dB

Waterproof Grade: IPX8

Max. Flow Rate: 2000L/H (35W),2800L/H (55W)

H-Max.(Lift Height): 2m/6.56ft, 2.6m/8.53ft

Cable Length: Approx. 115cm/ 180cm

Water Outlet Diameter: 16mm/0.63in, 19mm/0.75in

Pump Size: 18 * 18 * 13.5cm /7.09 * 7.09 * 5.31 in

Item Weight: 772g (35W)/ 981g (55W)



Package List:

1 * Water Pump

2 * Nozzles

1 * Water Tubing

4 * Rubber Suction Cups



Notes:

1. Please check the voltage and of the pump before on, insufficient and insufficient frequency would affect the flow rate.

2. This pump can only be used in fresh water or sea water, and cannot be used in any other .

3. The pump can't work in water above 35 degrees or below freezing point, otherwise it will be damaged.

4. DO NOT dry burn the pump for a long time, otherwise it would be damaged.

5. Please cut off the before you install/put in/take away the pump from the water; otherwise, the pump can't outlet water due to the air in it.

6. Switch on-off the repeatedly for several times to eliminate the air in the pump impeller and the pipe.

7. Please clean it regularly , the pump would make noises or even make the motor short circuit if blocked by debris.