4 Piece Set Crystal Handle For G20 G21 G22 G26 X3 G01 X4 G02 X5 G05 G06 G07 G14 G15 Gearbox Gear

Note：
Only Fit Left-Hand Drive(LHD) Cars Use.
Purchase attention:
1. Product is only suitable for the following models, other models cannot be used.
2. Product is only suitable for left-hand drive cars and cannot be used on right-hand drive cars. Please do not buy it.
3.Installation should see the instruction manual, can not operate without permission.The negative electrode of the battery in the trunk must be cut off before installation.Otherwise, it will cause damage to the car.(some cars have 2-3 battery)
4.Regarding tariffs. According to EU policy, all EU countries, if the order exceeds EUR150, your country will charge the corresponding tariff.This is the policy of the EU, which we cannot decide. Paying import duties is the buyers obligation, which is the policy of each country.
Applicable Models:
(Product is only suitable for the following models, other models cannot be used)
1 Series        F40      2021-2022
2 Series        F44      2021-2022
3 Series     G20/G21  2019-2023
4 Series    G22/G22  2019-2023
i4 Series     G26      2022-2023
Z4 Series     G29     2019-2023
8 Series    G14/G15   2019-2023
X3/iX3    G01/G08     2022-2023
X4        G02         2022-2023
X5        G05         2019-2023
X6        G06         2020-2023
X7         G07         2018-2023
Crystal Shift knobs Features:
1.Shift knobs made with high quality crystal, durable and practical to use.
2. Easy installation.
3. With an eye-catching 3/X/M
4. New nice gear stick knob design. Make your car elegant and stylish.
Product List
1* Crystal Gear Shift
1* Crystal Knob
1* Crystal Start Button
1* Crystal olume Button
LOSSLESS INSTALLATION：
-just remove the corresponding parts of the original car, and reinstall it back on the original road, replace the parer handle for lossless installation.
installation steps：
1. Remove the back cover
2. Remove the cable
3. Remove the T8 screws
4. Install fastening screws
5. Load the handle
6. Insert the cable
7.Close the back cover
8. The installation is complete
After the power is restored after installation, the solution to the problem of Parking assist system
failure is that the system will return to normal after about 10- 15 minutes of normal driving.
1. Loosen the nut.
2 Unplug the negative electrode wire of the vehicle battery from the negative electrode of the battery, place it on one side and fix it.
1. Loosen the nut.
2. Release the battery negative wire of the 12V dual energy storage system from the fi device.
WARNING：
Improper operation will lead to current short-circuit hazard and fire hazard
The battery negative conductors of the 12V battery (position in the car trunk) and auxiliary battery
(dual energy storage model, co-driver side position in the engine) must be unpled from the
battery negative electrode without any contact before installation. After being placed for about 10
minutes, the car will not be installed until the built- in current disappears. Continuous electric
installation will cause the car current short circuit to damage the shift assembly. Refund requests are
also refused for damage caused by improper installation. After purchasing the goods, please
contact us first for installation instructions.