Kind ts:1. Do not poke at the ization tablets of the spray mouth! Intersection Intersection2. Before using it for the first time, take out the cotton swab (pay attention to the springs of the bottom) and soak in the water for 1-2 minutes to allow the cotton swab to fully absorb water and then use it.3. Only tap water or mineral water can be used, and pure water cannot be used (it will affect the fog effect)How to use and function:1. Turn on the power, pre the on lightly, turn on the continuous spray mode, he on again, turn on the intermittent spray mode (spray for 4 seconds and 6 seconds), and pre the third time.2. In the case of booting, pre the on (not loose) to turn off the night light (colorful light) for two seconds, and then pre and turn on the night light.3. Automatically disconnect all the spray mode settings, which can be restarted and continued to be used.4. For the first time, fill it with water (about 90%) for 3-5 minutes before booting.Material: ABSProduct pack: 83*83*153mmStyle/color: glacier , Nordic powder, mint greenInstructions for use: Pre the switch at one time, in -direct injection function and colorful light; secry pre and switch, spraying function (4s stop 4s); pre the switch for the shutdown state for three times; pre the switch for three seconds, open colorful lights or colorful colorful colorful colorful colors lamp.Product sOutput interface: DC5V/1A rated power: 2WEnter interface: DC5V/0.4A product capacity: 200mlUse time: 6-10h spray volume: 25-40ml/hSpray mode: continuous/gap applicable water quality: mineral water/tap waterproduct descrtion:Product standard: a , one data cable, one instruction manual