433 MHz rf e Control DC 12V 1CH Relay Receiver for universaarage door Light LED Fanner motor Signal nsmission

Overview:
The 12 volt single circuit e control switch ICANNING C230419 adopts the main control chip prograng, with low power consumption, convenient single key operation, di working modes, and easy to use code operation. Can be applied in lighting control, smart home and other control scenarios.

Product characteristics
1 Working frequency: 433.92MHz;
2 Working modes: jog mode, s-locking mode, interlomode, delay mode;
3 Output method; Terminal blocks;
4 Demodulation method: ASK;
4 Shell material: ABS;
5 Control method: ordinary same frequency e control;
6 Product size: 34.5 * 29.5 * 17.1mm excluding shell;
7 Product weight: 14.88g excluding shell.

Operating Function Description
1 Code learning operation
Inching learning code: After the controller is connected to the power, briefly press the learning code on the light fes once, and then press the e control on for 3 seconds. The controller indicator light fes to indicate successful learning code, and the working mode is inching mode.
S locking code learning: After the controller is connected to the power, briefly press the code learning on twice once the light fes, and then press the e control on for 3 seconds. The controller indicator light fes to indicate successful code learning, and the working mode is automatic mode.
Interlocking code learning: After the controller is connected to the power, briefly press the code learning on three times press once to f the light once, and then press and hold one on on the e control for 3 seconds such as key A. The controller indicator light fes and remains on, and then press another on on the e control such as key B. The controller indicator light fes to indicate successful code learning, and the working mode is interlocking mode such as AB interlocking.
Delay for 5 seconds to learn code: After the controller is connected to the power, briefly press the learn code on four times once the light fes, and then press the e control on for 3 seconds. The controller indicator light fes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 5 seconds.
Delay of 10 seconds for learning code: After the controller is connected to the power, briefly press the learn code on five times once the light fes, and then press the e control on for 3 seconds. The controller indicator light fes to indicate successful learning code, and the working mode is automatic shutdown mode with a delay of 10 seconds.
Delay for 15 seconds to learn code: After the controller is connected to the power, briefly press the learn code on six times once the light fes, and then press the e control on for 3 seconds. The controller indicator light fes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 15 seconds.
Delayed code learning by 20 seconds: After the controller is connected to the power, briefly press the code learning on seven times once the light fes, and then press the e control on for 3 seconds. The controller indicator light fes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 20 seconds.
2 Clear code operation
Press and hold the learn code on on the controller for 5 seconds until the indicator light fes, indicating successful code clearing.
3 Clear code operation
Jog mode: After learning the code for a single on on the e control, press the on relay to ene, and release the on relay to disconnect.
S locking mode: After learning the code for a single on on the e control, press the on relay once to ene and then press the on relay again to disconnect.
Interlomode: After learning the codes for the two ons on the e control, press the A key to activate the relay, and press the B key to deactivate the relay.
Delay mode: After learning the code for a single on on the e control, press the on relay to ene, and after the delay, it will automatically disconnect.