433mhz Cloning Remote Control Copy Duplicator 433.92mhz RF Wireless Remote Control for Electric Garage Door Gate Car Home

 

​1. Type of programming: Programming with the receiver
2. Number of s: 4
3. : rolling
4. Frequency: 433,92 MHz
★Built-in sliding protection cover, which helps avoid accidental operation.
★Same hopping IC as the ones, providing superior performance and stability.
★Easy programming which takes less than 30 seconds.

Operation method:

1. pairing

P the remote control and the copy remote control as close as possible, first press a button of the remote control, and immediately after the indicator light turns on, press and hold a button of the self-copy remote control for about three seconds, the LED will f 3 times and then quickly Fing, it means that the address of the remote control button has been learned successfully. The other keys are operated in the same way for learning.

2, clear

Press the unlock button and the lock button at the same time for 2 seconds, the LED light will start to f 3 times. At this time, keep the lock button pressed and release the unlock button. Press the unlock button three or four times within 5 seconds, and the indicator light fes quickly, which indicates The has been cleared.

Test whether the existing of the remote control has been successfully cleared: When you finish the clearing action, you can press any button of the copy remote control. If the LED does not f immediately at this time, it will f after 2 seconds, that means The of the copied remote control has been completely cleared. If the LED still fes quickly and immediately, the still exists and needs to be cleared again.

3, restore the cleared

The copy remote control has a recovery function. If you accidentally clear the address of the normal copy remote control during use, you can press the start and mute buttons (the two buttons) on the remote control at the same time. After about three seconds, the LED will f 3 times. It starts to f quickly, which means that the cleared address is successfully restored.

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.