433MHz Copy Remote Control 4 Channel Electric Garage Gate Door Opener Fixed Code Duplicator Clone Car Key 12V Remote Control-Lock On

Description： Material: Plastic. Type: Wirele remote. For: Such as electric telescopic door remote control, road gate remote control, alarm remote control and so on. Wirele transmiion distance: 50-150 (m). (open space)

Features: This smart copy remote control is suitable for electric door remote control, telescopic door remote control, garage door remote control.

Cloning types:

2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on.

Different manufacturers have different prefixes model, as long as the digital portion of the can be the same model.

Note:

We usually do not recommend copying a rolling code , because there are many uncertainties when copying a rolling code . When copying a rolling code remote control, it is not poible to determine whether the remote control is an . Therefore, we do not recommend copying the rolling code remote control.

Use steps:

1. Clear code:

two fingers at the same time hold the unlock key and lock key; the LED light rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly click three times on the loose on until the LED light flashes quickly; the two fingers can release; then pre any one key of the remote control; when LED light goes off, it means clear code is succeful(four keys all empty); if ar you pre any on of the remote control, the light is still on, it indicates that the code has not been cleared succefully. You need to re-clear, and only succefully clearing the code can cloning be succeful. You can repeatedly clear and clone the code.

2. Copy:

left hand taking the remote control, right hand taking our cloned remote control and keep two remote control as close as poible; pre the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash quickly 2 times; ar one second, the indicator light keeps flashing and let go of your fingers; and then pre the key ar succeful study, the light keeps on, which means that the first key code on remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key... If the copy is succeful, the remote control function is the same as the matching remote control.

3. Restore:

When you accidentally clear the copy of the remote control code, you can simultaneously pre the copy of the remote control of the bottom two keys, LED lights will flash quickly, let go ar preing any key, light long, this Indicating that the code for the remote control is restored. Before using our copy remote control, please be sure to remove the existing code from the remote control.

4. How to deal with the situation where some of the keys can control, the rest cannot control? You can use clear and restore operation, the specific operation is as follows:

(1) first clear code;

(2) ar clearing code, copy the unsucceful key again, and there is no need to copy the rest ons;

(3) and then clear the code again;

(4) restore code; at this time, the keys that were not succefully copied are now covered by new codes, and the keys that were succefully copied are now retained. If there is no copy ar the second copy of the keys, repeat the above steps again and again until all keys are succefully copied.

Precautions:

1. Select the remote control of the prerequisite: the remote control function is normal, remote control is the same or compatible, remote control operating frequency the same.

2. The remote control can only copy the fixed code, learn the code and part of the single- remote control (can copy the model see copyable type).

3. Two-way remote control, rolling code remote control, single- program remote control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301 and so on.

4. Before copying the remote control, make sure that the existing code on the remote control has been cleared and check that the code is cleared succefully. Otherwise, it cannot be copied.

5. Please ensure that your remote control has enough power, the distance between the two remote control the better! If the copy distance is too close to the switch at different angles to copy. Pre and hold the on on the remote control to send the signal completely normal, and then pre the on on the remote control to ensure that the function is completely copied.

Package included:

1 * 433MHZ remote control duplicator.

83876

Best Prices

About shipping

Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 




Special Announcement:

Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .




Your 100% satisfaction is very ant to us

If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.